Search This Blog

Saturday, August 13, 2016

Wireless Energy Transfer via coupling induction.

Introduction

Wireless Power transfer  was first demonstrated by Nikola Tesla in the 1890s, however it is only really in the last decade that the technology has been harnessed to the point where it offers real, tangible benefits to real world applications.  In particular, the development of resonant wireless power technology for the Consumer Electronics market, has seen wireless charging deliver new levels of convenience for the charging of millions of everyday devices.
Wireless Power is commonly known by many terms, including Inductive Power Transfer (IPT), Inductive Coupling and Resonant Power Transfer. Each these terms essentially describe the same fundamental process – the transmission of energy from a power source to an electrical load, without connectors, across an air gap.  The basis of a wireless power system involves essentially two coils – a transmitter and receiver coil.  The transmitter coil is energized by alternating current to generate a magnetic field, which in turn induces a current in the receiver coil.

How does Wireless Power work?

The basics of wireless power involves the transmission of energy from a transmitter to a receiver via an oscillating magnetic field.
To achieve this, Direct Current (DC) supplied by a power source, is converted into high frequency Alternating Current (AC) by specially designed electronics built into the transmitter.
The alternating current energizes a copper wire coil in the transmitter, which generates a magnetic field.  Once a second (receiver) coil is placed within proximity of the magnetic field, the field can induce an alternating current in the receiving coil.
Electronics in the receiving device then converts the alternating current back into direct current, which becomes usable power.
The diagram below simplifies this process into four key steps.

  1. The ‘mains’ voltage is converted in to an AC signal (Alternating Current), which is then sent to the transmitter coil via the electronic transmitter circuit.
  2. The AC current flowing through the transmitter coil induces a magnetic field which can extends to the receiver coil (which lies in relative proximity)
  3. The magnetic field then generates a current which flows through the coil of the receiving device. The process whereby energy is transmitted between the transmitter and receiver coil is also referred to as magnetic or resonant coupling and is achieved by both coils resonating at the same frequency. Current flowing within the receiver coil is converted into direct current (DC) by the receiver circuit, which can then be used to power the devic



What is meant by “Resonance”?

The distance at which the energy can be transferred is increased if the transmitter and receiver coils are resonating at the same frequency.
This resonant frequency refers to the frequency at which an object naturally vibrates or rings – much like the way a tuning fork rings at a particular frequency and can achieve their maximum amplitude.

Benefits of Wireless Power

  • Reduce costs associated with maintaining direct connectors (like those in the tradtional slip ring).
  • Greater convenience for ​the charging of everyday electronic devices
  • Safe​ power transfer to applications that need to remain sterile or hermetically sealed
  • Electronics can be fully enclosed, reducing the risk of corrosion due to elements such as oxygen and water.
  • ​Robust and consistent power delivery to rotating, highly mobile industrial equipment​
  • ​Delivers reliable power transfer to mission critical systems in wet, dirty and moving environments.
Whatever the application, the removal of the physical connection delivers a number of benefits over traditional cable connectors, some of which aren’t always obvious.  The video below highlights just some of the benefits and advantages of wireless power and offers an insight into a world where wireless power is widely integrated into industrial and mission critical environments.

Thanks http://powerbyproxi.com/wireless-power/

No comments:

Post a Comment