Search This Blog

Wednesday, March 12, 2014

INFORMATION SECURITY RELATED RISKS AND PREVENTION

Simple steps to prevent you being victimized for an Information Security based
Attack
Today information security has become a part of our lives. Consciously or not everyone uses
Information Technology (IT). Regardless of the extent of sophistication of Mobile phones,
Computers, iPods, iPhones, iPads, Navigation systems, and ATM Machines or Cyber cafes yet you
are at Information security related risk. Simply any device with processing power we call a
computer and if it has any form of connectivity it is called a communication device. The greater
number of features the equipment or the device has it becomes more vulnerable. Either category
of these devices falls within the classification of information technology base devices of equipment.
As a result of globalization any device invented and introduced today will be available in the open
market tomorrow. Most of the high tech devices available in the market have not been subjected to
proper information security testing procedures before they reach the general public. The reason is;
heavy competition among the production companies. Every company wants to release its own
product to the market before other competitors release other compatible products. This
competition compromises quality, security testing and other necessary post production procedures.
This becomes even worse when some critical high tech equipment and devices used by high-tech
intelligence agencies for their investigations can now be found in the Singapore, and Hong Kong
based Chinese open market at very low prices without any restrictions. Some of them can even be
ordered from home and delivered to one’s doorstep without verifying the intention of use.
This is an emerging issue in Asian countries including Sri Lanka. Since a growing number of
people are required to use information technology based equipment, processors and activities
these days, information security risks also have risen rapidly. According to recent reports many of
Sri Lanka’s young generation have been victims of Information Security related attacks. The main
reason is lack of awareness about information security risks related to the devices, technologies
and processors that they are using. This article attempts to describe, with examples, some of the
threats associated with Information Technology related equipment.The objective of this article is to give you a summarized form of information about technology/Devices and Procedures people use currently. This information describes their security risks and provides simple precautions one can take in order to prevent being victim to information security based attacks. Many of the researches and case studies have proven that most of the incidents happen due to lack of awareness about the
technologies and their impacts. I will not be discussing the technology or technical details of t
he devices and how their security can be breached, but will try to give you general understa
nding and awareness about the Information Security related risk of devices that you are using
and what simple precautions you can take in order to minimize the security risk. I have not gon
e into greater details since my objective is to prepare a simple paper of security risks and precau
tions. I have included in the final page some of the definitions of IT related terms that would be 
helpful.
Download full article in PDF format – Download

Thanks
Kushantha GunawardanaKushantha Gunawardana MSc-IT,C|EI,MCT,C|EH,C|HFI
MSc-IT, C|EH, C|HFI, CISE, IEEE, MBCS, MCS (lk), MCSE (W2K) + M MCSA (W2K3), HNDIT

காளான் மருத்துவ குணங்கள்:-

காளான் மழைக்காலங்களில் மட்கிப்போன பொருட்களின் மீது வளரும் ஒருவகை பூஞ்சையினமாகும். இயற்கையாய் வளரும் காளான்களில் சில விஷமுள்ளதாகவும், சில விஷமற்றதாகவும் வளரும். விஷக் காளான்கள் துர்நாற்றம் வீசக்கூடியதாகவும், அதிக வண்ண முடையதாகவும் இருக்கும்.

காளான் வளர்ப்பு சிறந்த வருவாய் ஈட்டித்தரும் எளிய தொழிலாக உள்ளது. இதனை பல இடங்களில் குடிசைத் தொழிலாக மேற்கொண்டு வருகின்றனர். காளான் மிகுந்த சுவையுள்ளதாகவும், மிகுந்த சத்துக்கள் கொண்டதாகவும் இருப்பதோடு மிகுந்த மருத்துவப் பயன் கொண்டதாக உள்ளது.

காளான் இதயத்தைக் காக்கும் அற்புத உணவாகும். காளான் இரத்தத்தில் கலந்துள்ள அதிகப்படியான கொழுப்பைக் கரைத்து இரத்தத்தைச் சுத்தப்படுத்தும் தன்மை கொண்டது. இதனால் உயர் இரத்த அழுத்தம் மற்றும் இரத்த நாளங்களின் உட்பரப்பில் உண்டாகும் கொழுப்பு அடைப்பைத் தடுக்கிறது.

காளானில் உள்ள லென்ட்டைசின்(lentysine), எரிட்டிடைனின்(eritadenin) என்ற வேதிப் பொருட்கள் இரத்தத்தில் கலந்துள்ள ட்ரை கிளிசரைடு பாஸ்போலிட் போன்றவற்றை வெகுவாகக் குறைக்கிறது.

இதில் எரிட்டினைன் கொழுப்புப் பொருட்களை எந்த வித பாதிப்பும் இல்லாமல் இரத்தத்திலிருந்து வெளியேற்றி பிற திசுக்களுக்கு அனுப்பி உடலை சமன் செய்கிறது.

இவ்வாறு உடலில் அதிகம் தேவையில்லாமல் சேரும் கொழுப்பு கட்டுப்படுகிறது. இதனால் இரத்தம் சுத்தமடைவதுடன் இதயம் பலப்பட்டு நன்கு சீராக செயல்படுகிறது. இதயத்தை பாதுகாப்பதில் காளானின் பங்கு அதிகம்.

பொதுவாக உயர் இரத்த அழுத்தம் ஏற்படும் போது உட்புறச் செல்களில் பொட்டாசியத்தின் அளவு குறையும். வெளிப்புறச் செல்களில் உள்ள சோடியம், உட்புறமுள்ள பொட்டாசியத்திற்கு சமமாக இருக்கும்.

இரத்த அழுத்தத்தின் போது வெளிப்புறத்தில் சோடியம் அதிகரிப்பதால் சமநிலை மாறி உற்புறத்தில் பொட்டாசியத்தின் அளவு குறைகிறது. இதனால் இதயத்தின் செயல்பாடு மாறிவிடுகிறது.

இத்தகைய நிலையைச் சரிசெய்ய பொட்டாசியம் சத்து தேவை. அவை உணவுப்பொருட்களின் மூலம் கிடைப்பது சாலச் சிறந்தது. அந்த வகையில் பொட்டாசியம் சத்து அதிகம் உள்ள உணவு காளான்தான். 100 கிராம் காளானில் பொட்டாசியம் சத்து 447 மி.கி உள்ளது. சோடியம் 9 மி.கி உள்ளது. எனவே இதயத்தைக் காக்க சிறந்த உணவாக காளான் உள்ளது.

மேலும் காளானில் தாமிரச்சத்து உள்ளதாகவும் கண்டறியப்பட்டுள்ளது. தாமிரச்சத்து இரத்த நாளங்களில் ஏற்படும் பாதிப்பை சீர் செய்யும். காளான் மூட்டு வாதம் உடையவர்களுக்கு சிறந்த நிவாரணியாகும். மலட்டுத்தன்மை, பெண்களுக்கு உண்டாகும் கருப்பை நோய்கள் போன்றவற்றைக் குணப்படுத்துகிறது.

தினமும் காளான் சூப் அருந்துவதால் பெண்களுக்கு உண்டாகும் மார்பகப் புற்றுநோய் தடுக்கப்படுவதாக காளான் பற்றிய சமீபத்திய ஆராய்ச்சியில் கண்டுபிடித்துள்ளனர். 100 கிராம் காளானில் 35 சதவீதம் புரதச்சத்து உள்ளது.

மேலும் உடல் வளர்ச்சிக்குத் தேவையான அமினோ அமிலங்கள் உள்ளதால், குழந்தைகளின் உடல் வளர்ச்சிக்கு சிறந்த ஊட்டசத்தாக அமைகிறது. எளிதில் சீரணமாகும் தன்மை கொண்டது.

கடும் காய்ச்சலால் பாதிக்கப்பட்டு உடல் இளைத்தவர்கள் தினமும் காளான் சூப் அருந்தி வந்தால் விரைவில் உடல் தேறும். காளானை முட்டைகோஸ், பச்சைப் பட்டாணியுடன் சேர்த்து சமைத்து அருந்தி வந்தால் வயிற்றுப்புண் குணமாகும்.

மன நோயைப் பற்றி சில உண்மைகள்

இப்பொழுதெல்லாம் மருத்துவ ரீதியாக, மனநோயும் இதர நோய்களை போலவே ஒரு வியாதியாகவே கருதப்படுகிறது. ஏனெனில் இந்நோயை சிகிச்சை மூலமாக கட்டுப்படுத்தக் கூடும். சில சந்தர்ப்பங்களில் பூரணமாக குணப்படுத்தவும் முடியும் என்பதனாலேயே.

மன நோய் வெட்கப்பட வேண்டிய ஒன்றானதாகவோ, குழப்பத்தையும், திகைப்பையும் உண்டு பண்ண கூடியதாகவோ, தற்காலத்தில் எண்ணப்படுவதில்லை. மேலும் ஆபத்தை தருவது, தீராதது, சமூகத்தின் பார்வையிலிருந்து மறைத்து வைக்கப்பட்ட வேண்டிய நோய், மனநோய் என்பதும் உண்மையன்று.

மன நோயும், அறிவுத்திறன் குறைவும் ஒன்று என கொள்ளலாமா?
மன நோயும், அறிவுத்திறன் குறைவும் ஒன்றேயல்ல. அவை, வேறானவை. அறிவுத்திறன் குறைந்தவர்களிடையேயும் சில மன நோய்களும் ஏற்படுவதுண்டு. ஆனால் மனநோய் உள்ளவர்கள் யாவரும் அறிவுத்திறன் குன்றியவர்கள் ஆகமாட்டார்கள்.

அறிவுத்திறன் குன்றியவர்கள், கற்றுக் கொள்வதிலே சிரமும், தாமதமும், உள்ளவர்களாயிருப்பர். பொதுவாகவே குழந்தைப் பருவத்திலேயே இந்தக் கோளாறு இருப்பதைக் கண்டறியக் கூடும். இது மிகவும் கடுமையானதாகவும், அல்லது மத்தியதரமானதாகவும், இருக்கக்கூடும்.

இந்தக் கோளாறுக்கு காரணங்கள், மூளை பாதிக்கப்படுதல், சினை அணுக்களில் சீரழிவு, வளர்ப்பு ஏதுக்களில் கெடுதி முதலியனவாகும். ஆரம்பத்திலேயே அறிவுத்திறன் அளவை நிச்சயித்து, அதற்குத் தகுந்த, உரிய பயிற்சிகள் தருவதன் மூலம், அறிவு நிலை குன்றியோர் வாழ்வில், நல்லதொரு திருப்பமும், மாற்றமும் கொண்டு வரக்கூடும்.

மனநோய் பாரம்பரியமாய் பெற்றோர்களிடமிருந்து குழந்தைகளுக்கு வழிவழியாய் வரக்கூடுமா?
சில வகையான மனநோய்கள், உதாரணமாக, மனமுறி நோய், மன எழுச்சி நோய் போன்றவை, சில குடும்பங்களில் (இதர குடும்பங்களை விட) அதிகமாய் தோன்றி பாதிக்கின்றன. பாரம்பரியக் கோளாறே இந்நிலைக்கு அடிப்படையாய், ஆதரவாய், இருக்கிறது எனக் கூறலாம்.

பாரம்பரியத்தால் வரும் தீங்கு என்னவென்றால், மனநோய் தோற்றுவாய்க்கு, எளிதில் ஆளாக்கும் தன்மையை, நிலையை, உற்பத்தியாக்குவதேயாம். எனினும், மற்ற பல காரணங்களும் நோய் விளைவுக்கு அவசியமாயிருப்பதனாலே ஓரிருவரைத் தவிர, அக்குடும்பத்தைச் சேர்ந்த பெரும்பாலோர், இந்த நோயால் தாக்கப்படுவதில்லை.

மனநோய் தொற்று நோயாகுமா?

மனநோய் தொற்று நோய் அல்ல. அம்மை நோய், மண்ணை கட்டி நோய், தட்டம்மை போன்று ஒருவரிடமிருந்து இன்னொருவருக்கு தொற்றி பரவும் நோய், மனநோய் அல்ல.

மன நோயாளர் வன்முறையாளர்கள்?

சமூகத்தில் உள்ள பெரும்பாலரை விட, மன நோயால் பாதிக்கப்பட்டவர், வன்முறைகளை கையாளுபவர் என கொள்ளுதல் சரியானதாகாது. எனினும் மன நோயாளர் அச்சமும், ஐயுறவும் கொண்டிருப்பதாலேயே குழப்பத்தோடு பயற்திற்கேற்ப, சமூகத்தை பாதிக்கும் செயல்கள் ஆற்றுகிறார்கள் என கொள்ளலாம்.

அப்பேற்பட்ட சந்தர்ப்பங்களில் சமூகப் பாதுகாப்பிற்காகவும் நோயாளியின் நலனையும் கருதி, அவர்களை கட்டுப்படுத்த வேண்டிய அவசியமேற்படுகிறது.

மனநோயாளிகளின் நலன்களைக் கருதி அவர்களை பூட்டி பாதுகாப்பில் வைக்க வேண்டுமா?

பெரும்பாலான மன நோயாளிகள், ஆஸ்பத்திரியில் சேர்க்கப்படாமலேயே, வெற்றிகரமாய் குணப்படுத்தப்படுகிறார்கள். அதனால் அநேகருக்கு மருத்துவமனையில் சேர்க்கப்பட வேண்டிய அவசியமில்லாமல் போய் விடுகிறது. எனினும், ஒரு சிலர் நோயின் கொடுமையால் மிகவும் பாதிக்கப்படுவதின் நிமித்தம்.

மருத்துவமனையில் சேர்ந்து தீவிர சிகிச்சையும், ஆதரவும் பெற வேண்டியிருக்கிறது. என்றாலும், பெரும்பாலோர் முரட்டுத்தனமாக இருப்பதில்லை. மனநோய் மருத்துவமனையில் பெரும்பாலான அறைகள், பகுதிகள், பூட்டி வைக்கப்படுவதில்லை. மிகச் சிலரையே சமூகப் பாதுகாப்பிற்காகவும், நோயாளியின் சொந்த பாதுகாப்பிற்காகவும், பூட்டி வைக்க வேண்டிய நிர்பந்தம் ஏற்படுகிறது.

மனேநோயை குணப்படுத்த முடியுமா?

மக்களில் பலர், தங்கள் வாழ்க்கையில் ஒரே ஒருமுறை தான் மனநோயால் அவதியுற்று, பிறகு எப்போதுமே அந்நோயால் பாதிக்கப்படாமலே இருக்கின்றார்கள். ஒருசிலர், பலதடவை, மறுபடியும் மறுபடியுமாக, மனநோயால் தாக்கப்படுகிறார்கள்.

மிகச் சிறுபான்மையினர் தங்கள் வாழ்நாள் முழுவதும் மனநோயால் கஷ்டப்படுகிறார்கள். உடலைப் பற்றிய நோய்களை போலவே மன நோய்களிலும் மறுபடியும் பிணிவாய்ப்படுதல் என்பது, சகஜமாய் நிகழக்கூடியது தான். மேலும் பல வருடங்களாக நோயால் பாதிக்கப்பட்டவர்களும் குணமடையலாம்.

குழந்தைகளின் அழுகைக்கான காரணங்கள் :-

குழந்தைகளின் அழுகைக்கு பல காரணங்கள் இருக்கின்றன. குழந்தைகளின் அழுகைக்கு என்ன காரணம், அதை எப்படி கண்டுபிடிப்பது என்பதை இங்கே காணலாம்.. பசியால்தான் பெரும்பாலும் குழந்தைகள் அழும். பசியால் அழுதால் எளிதாக கண்டு பிடித்துவிடலாம்.

குழந்தைகள் பால்குடிக்கும்போது என்ன அறிகுறிகளை காட்டுமோ அதை எல்லாம் அந்த அழுகையோடு வெளிப்படுத்தும். கைவிரலை சப்புதல், பால்குடிப்பதுபோல் உதடுகளை சுளித்தல், உதடுகளை அம்மாவின் உடல் மீது சேர்த்தல், அம்மாவின் முகத்தை பார்த்தல் போன்றவைகள் எல்லாம் பசியால் ஏற்படும் அழுகையின்போது வெளிப்படும்.

பசி தீர்ந்து, குழந்தை நன்றாக தூங்கும்போது திடீரென்று அழுதால் சிறுநீர் கழித்து நனைந்திருக்கிறது என்று அர்த்தம். அதுதான் காரணம் என்றால், நனைந்த துணியை மாற்றியதும் குழந்தை நிம்மதியாக தூங்கத் தொடங்கிவிடும்.

வீட்டில் அதிக சத்தமோ, திடீர் சீதோஷ்ணநிலை மாற்றமே ஏற்பட்டால் அது குழந்தைகளின் தூக்கத்தை பாதிக்கும். அப்போதும் அழத் தொடங்கிவிடும். குளிப்பாட்டி, பசியை தீர்த்ததும் எல்லா குழந்தைகளும் தூக்கத்திற்கு தயாராகிவிடும். அப்போது தூக்கத்திற்கு ஏற்ற சூழ்நிலை அமையாவிட்டால் குழந்தைகள் அழுதுவிடும். அந்த குழந்தையின் அருகில் இருந்து மற்ற குழந்தைகள் விளையாடிக் கொண்டிருந்தாலும், தூங்க முடியாமல் குழந்தை தவிக்கும்.

சில நேரங்களில் குழந்தைகள் அம்மா தன்னை தூக்கி கொஞ்சவேண்டும் என்பதற்காகவும் அழும். அப்போது அம்மா எடுத்து, நெஞ்சோடு சேர்த்து, கொஞ்சி சிறிது நேரம் பேசினால் அழுகையை நிறுத்திவிடும். அம்மாவின் பாதுகாப்பும், அரவணைப்பும், வருடலும் குழந்தைகளுக்கு எப்போதும் தேவைப்படுகிறது. அது கிடைக்காதபோது அழுகையைத் தொடங்கிவிடும்.

குழந்தைகளை அதிகமாக அழவைப்பது, அதன் வாயு தொந்தரவு. பால் குடித்த சிறிது நேரத்திலே இந்த தொந்தரவு ஏற்பட்டு குழந்தைகள் அழும். பிறந்த 3, 4 மாதங்களில் வாயு தொந்தரவு அதிகம் ஏற்படும். அதனால் பால் புகட்டியதும் சிறிது நேரம் தோளில் போட்டு தட்டிக்கொடுத்தால் குழந்தை ஏப்பம் விடும். அப்போது வாயு வெளியேறிவிடும்.

பால் புகட்டியதும் குழந்தையை படுக்கவைக்காமல் இருந்தால், இந்த அழுகை ஏற்படாது. குளிர் அல்லது திடீர் உஷ்ணத்தை குழந்தைகளால் தாங்கிக்கொள்ள முடியாது என்பதாலும் அழும். குளிப்பாட்டிவிட்டு உடனே தலையை துவட்டி, உடலை துடைக்காவிட்டாலும், நனைந்த நாப்கினை மாற்ற தாமதமானாலும் குளிரால் குழந்தைகள் அழும்.

குழந்தைகளை குளிப்பாட்டி முடிந்ததும் உடனே உடலை துடைத்துவிடவேண்டும். குளிர்ந்த நீரிலும், சுடுநீரிலும் குழந்தைகளை குளிப்பாட்டக்கூடாது. குளிப்பாட்டும் நீரில் டெட்டால் போன்ற எதையும் கலக்கவும்கூடாது. பேபி சோப், பேபி லோஷன் போன்றவற்றை மட்டும் பயன்படுத்தவேண்டும்.

பல் முளைக்கும்போது சில குழந்தைகள் வலியால் அழும். அந்த அழுகை நீடித்தால் குழந்தையை டாக்டரிடம் காண்பிப்பதே நல்லது. 4 முதல் 7 மாதத்திற்குள் முதல் பல் முளைக்கும். அப்போது ஈறை தடவிப் பார்த்தால் உணர முடியும்.

அறிமுகமற்றவர்கள் தூக்கும்போதும், ஆடை தொந்தரவாக அமையும்போதும், பால் குடிப்பதும்- தூங்குவதுமாக பொழுதை போக்கி போரடித்தாலும் குழந்தைகள் அழும். காரணத்தைக் கண்டறிந்து, சரி செய்ய முடியாதபோது அழும் குழந்தையை டாக்டரிடம் கொண்டுபோய் காண்பிப்பதே சரியான வழி.

Taal Volcano, Luzon Island (Philippines)


An island, within a lake, in a volcano, in a lake, on an island 

Taal Volcano, Luzon Island (Philippines)

Leaf art

Amazing Predator

Tuesday, March 11, 2014

ANCIENT TRIPURAA SUNDARI TEMPLE ....


Naggar, Himachal Pradesh.

Tripurasundarī ("Beautiful (Goddess) of the Three Cities") or Mahā-Tripurasundarī ("Great Beautiful (Goddess) of the Three Cities"), also called Ṣoḍaśī ("Sixteen"), Lalitā ("She Who Plays"[1]) and Rājarājeśvarī ("Queen of Queens, Supreme Ruler"), is one of the group of ten goddesses of Hindu belief, collectively called Mahavidyas. She is the highest aspect of Goddess Parvati.

As true knowledge she is called Samvit, which is the power to comprehend all things as consciousness itself.

शिन्दुररुन विग्रहम् त्रिनयनम् मनिक्यमौलि स्फुरत्
टर नयक शेखरम् स्मितमुखिम् अपिन वक्शोरुहम् ।
फनिभ्यम् अलिपूर्न रत्न चशकम् रक्तोत्पलम् बिभ्रतिम्
शौम्यम् रत्न घतस्थ रक्तचरनम् ध्ययेत् परमम्बिकम्॥

Sinduraruna vigraham trinayanam manikyamauli sphurat
Tara nayaka shekharam smitamukhim apina vakshoruham |
Panibhyam alipoorna ratna chashakam raktotpalam bibhratim
Saumyam ratna ghatastha raktacharanam dhyayet paramambikam||

The Divine mother is to be meditated upon as shining in a vermilion-red body, with three eyes, sporting a crown of rubies studded with the crescent moon, a face all smiles, a splendid bust, one hand holding a jewel-cup brimming with mead, and the other twirling a red lotus.

As Shodashi, Tripurasundari is represented as a sixteen-year-old girl, and is believed to embody sixteen types of desire. Shodashi also refers to the sixteen syllable mantra, which consists of the fifteen syllable (panchadasakshari) mantra plus a final seed syllable. The Shodashi Tantra refers to Shodashi as the "Beauty of the Three Cities," or Tripurasundari.

Tripurasundari is the primary goddess associated with the Shakta Tantric tradition known as Sri Vidya.The Goddess Who is "Beautiful in the Three Worlds" (Supreme Deity of Srikula systems); the "Moksha Mukuta".

கற்பு

வரதர்

 

 









மாலை நாலரை மணி. பிள்ளையார் கோயில் கணபதி ஐயர் வீட்டில் முன்விறாந்தையில் மூர்த்தி மாஸ்டரும் ஐயரும் கதைத்துக் கொண்டிருக்கிறார்கள். எங்கெல்லாமோ சுற்றிவந்து கடைசியில் இலக்கிய உலகத்திலே புகுந்தார்கள்.

''மாஸ்டர், நீங்கள் 'கலைச்செல்வி'யைத் தொடர்ந்து படித்து வருகிறீர்களா?'' என்று கேட்டார் ஐயர்.

''ஓமோம், ஆரப்பத்திலிருந்தே 'பார்த்து' வருகிறேன். ஆனால் எல்லா விடயங்களையும் படித்திருக்கிறேனென்று சொல்ல முடியாது. ஏன் என்ன விசேஷம்?''

''கலைச்செல்வி பழைய பிரதி ஒன்றை இன்றுதான் தற்செயலாகப் படித்துப் பார்த்தேன். அதிலே ஒரு சிறுகதை....''

''யார் எழுதியது?''

''எழுதியவர் பெயரைக் கவனிக்கவில்லை. அந்தச் சம்பவந்தான் மனதை உறுத்திக்கொண்டே இருக்கிறது.''

''சொல்லுங்கள். நினைவு வருகிறதா பார்க்கலாம்?''

''மூன்றாம் வருஷம் இலங்கையில் பெருவெள்ளம் ஏற்பட்டதல்லவா? அந்தச் சூழ்நிலையை வைத்துக் கதை எழுதப்பட்டிருக்கிறது. குளக்கட்டை உடைத்துக்கொண்டு ஒரு கிராமத்துக்குள் வெள்ளம் பெருகி வருகிறது. சனங்கள் உயரமான இடத்தைத் தேடி ஓடுகின்றார்கள். அந்த ஊரில் ஒரு பணக்காரனின் வீட்டுக்கு 'மேல் வீடு'ம் இருக்கின்றது. அங்கே அவன் தனியாக இருக்கிறான். வெள்ளத்துக்கு அஞ்சி ஒரு ஏழைப்பெண் - இளம் பெண் - அந்த மேல் வீட்டுக்குச் செல்கிறாள், பணக்காரன் அவளைப் பதம் பார்க்க முயல்கிறான். அவள் இசையவில்லை. அவன் பலாத்காரம் செய்தேனும் அவளை அடைந்துவிடத் துணிந்து விட்டான். அவள் உயிரைவிடக் கற்பையே பெரிதாக மதிப்பவள். மேல் வீட்டிலிருந்து கீழே குதித்து உயிரைத் துறந்தாள். கற்பைக் காப்பாற்றிக் கொண்டாள்.... இந்தக் கதையைப் பற்றி என்ன நினைக்கீர்கள் மாஸ்டர்?''

''என்ன நினைக்கிறது? புராண காலத்தில் இருந்து திருப்பித் திருப்பிப் படித்த 'கருத்து'த் தான். கதையை அமைத்த முறையிலும், வசன நடையின் துடிப்பிலும் தான் இந்தக் கதைக்கு வாழ்வு கிடைக்கும். நான் படிக்கவில்லை படித்தால் தான் அதைப் பற்றிச் சொல்லலாம்.''

''நான் கதைக்கு விமர்சனம் கேட்கவில்லை மாஸ்டர். புராண காலத்திலிருந்து படித்ததாதச் சொன்னீர்களே. அந்தக் கருத்தைப் பற்றித்தான் உங்கள் அபிப்பிராயம் என்ன என்று கேட்கிறேன்.''

''எதைக் கேட்கிறீர்கள் ஐயா? தனது கற்பைக் காப்பாற்ற உயிரைத் துறந்தாளே, அதைப்பற்றியா?''

''ஓமோம், அதையே தான்''

''ஒரு பெண்ணின் - முக்கியமாகத் தமிழ்ப் பெண்ணின் சிறப்பே அதில்தானே இருக்கிறது. மானம் அழிந்தபின் 'வாழாமை இனிதென்பதல்லவா தமிழின் கொள்கை?'''

ஐயர் பெருமூச்சு விட்டார். பிறகு, ''நீங்களும் இப்படிச் சொல்கிறீர்களா?'' என்று கேட்டார்.

மூர்த்திமாஸ்டர் திகைத்தார். நான் என்ன தவறுதலாகச் சொல்லிவிட்டேன்? இந்த ஐயர் என்ன இப்படிக் கேட்கிறார்?

ஒரு நிமிஷநேரம் மௌனம் நிலவிற்று. ஏதோ எண்ணித் துணிந்து விட்டவர் போல கணபதி ஐயரே மீண்டும் மௌனத்தைக் கலைத்தார்.

'மாஸ்டர், எனக்கும் என் மனைவிக்கும் தெரிந்த ஒரு இரகசியத்தை உங்களுக்கு சொல்லப் போகிறேன். உங்களுக்கு சொல்லலாம். சொல்வதால் ஒரு தீமையும் ஏற்படாது. இதைக் கேட்ட பிறகு 'கற்பு' பிரச்சனையைப் பற்றிப் பேசுவோம்.
........................................................

போன வருஷம் பெரியந்தனை முருகமூர்த்தி கோயிலில் நான் பூசை செய்து கொண்டிருந்தது உங்களுக்குப் தெரியும். அங்கே தமிழர்கள் தொகை ஐம்பது பேர் கூட இருக்காது. விசேட தினங்களுக்கு மட்டும் பிற இடங்களில் இருந்தெல்லாம் வந்து கூடுவார்கள். சிங்களவர் கூடப் பலர் கோயிலுக்கு வந்து அருச்சனை செய்விப்பது வழக்கம்.

சிங்களவர் - தமிழர் கலகம் துவங்கினவுடனே அங்கே இருந்த தமிழர்களில் முக்கால்வாசிப் பேரும் யாழ்ப்பாணத்துக்கு ஓடி வந்து விட்டார்கள். நான் பூசையை விட்டு விட்டு எப்படிப்போக முடியும்? என் மனைவியைப் போகும்படி சொன்னேன். எனக்கு வருவது தனக்கும் வரட்டும் என்று அவள் மறுத்து விட்டாள். சிங்களவரும் அக்கோயிலிலே கும்பிட வரும் வழக்கம் இருந்ததால் கோயில் விஷயத்தில் தலையிடமாட்டார்கள். எங்களுக்கும் ஆபத்து நேராது என்ற துணிவில், அவளை மேலும் வற்புறுத்தாமல் விட்டு விட்டேன்.

ஒரு புதன்கிழமை, அன்று பேபிநோனா என்ற சிங்களக் கிழவி – அவள் எங்களோடு நன்கு பழகியவள் - கோயிலுக்கும் நாள் தவறாமல் வருகிறவள் - அவள் சொன்னாள் - 'நீங்கள் இனி இங்கேயிருப்பது புத்தியில்லை ஐயா. காலியிலிருந்து சில முரடர்கள் மூன்று லொறிகளில் வருகிறார்களாம். வருகிற வழியெல்லாம் தமிழர்களை இல்லாத கொடுமை செய்கிறார்களாம். இன்றிரவோ நாளையோ இந்தப் பக்கம் வரக்கூடுமென்று கதைக்கிறார்கள். நீங்கள் இப்போதே புறப்பட்டு பொலீஸ் துணையோடு கொழும்புக்குச் செல்லலாம்' – என்றாள்.

அவள் சொன்னதைக் கேட்ட பிறகு, 'அப்பனே முருகா! என்னை மன்னித்துக்கொள்' மனதுக்குள் வேண்டிக் கொண்டு கையோடு கொண்டுபோகக் கூடிய பொருட்களை இரண்டு பெட்டிகளுள் சேகரித்தோம். என் மனைவியின் நகைகளையும் - நூலில் கட்டிய தாலி ஒன்றைத் தவிர – எல்லாவற்றையும் கழற்றிப் பெட்டியில் பூட்டினோம். இந்த ஆயத்தங்கள் செய்வதற்குள் மாலை ஐந்து மணியாகிவிட்டது. பேபி நோனா அவசரம் அவசரமாக ஓடிவந்தாள். 'ஐயா, ஐயா சில்வாவும் வேறு இரண்டு பேருமாக வாறாங்கள். அம்மாவை அவர்கள் கண்ணில் படாமல் எங்கேயாவது ஒளித்திருக்கச் சொல்லுங்கோ! கேட்டால் 'நேற்றே ஊருக்குப் போய்விட்டா' என்று சொல்லுங்கோ. நான் இங்கே நின்றால் எனக்கும் ஆபத்து, உங்களுக்கும் ஆபத்து' கவனம் ஐயா' – என்று சொல்லிவிட்டு பேபிநானோ ஓடி மறைந்து விட்டாள்.

சில்வாவை எனக்குத் தெரியும், ஆள் ஒருமாதிரி 'ஐயா ஐயா, என்று நாய் மாதிரிக் குழைந்து ஐப்பது சதம், ஒரு ரூபா என்று இடைக்கிடை என்னிடம் வாங்கி இருக்கிறான். ஆள் காடைத் தரவளியாதலால் நானும் பட்டும் படாமலும் நடந்து வந்திருக்கிறேன். இரண்டொரு நாள் என் மனைவியை றோட்டில் தனியாகக் கண்டபோது அவனுடைய பார்வையும், சிரிப்பும் நன்றாக இருக்கவில்லை என்று அவள் சொல்வதுண்டு.

இப்போது அவன் வருகிறானென்றால் எனக்கு ஒரு கணம் ஒன்றும் தோன்றவில்லை. யோசிக்கவும் நேரமில்லை. வீட்டுக்குள் உயரத்தில் பரண் மாதிரி மூன்று மரங்களைப் போட்டு அதன்மேல் சில பழைய பெட்டிகளைப் போட்டிருந்தோம். என் மனைவியை நான் தூக்கி அந்த மரங்களின் மேல்விட்டு மெதுவாக அந்தப் பெட்டிகளின் பின்னால் மறைந்திருக்கும்படி விட்டேன். பின் எங்கள் பயணப் பெட்டிகளை எடுத்துச் சற்று மறைவாக ஒரு மூலையில் வைத்துவிட்டேன். பிறகு முன் விறாந்தைப் பக்கம் வந்தேன். நானும் வர, அந்தக் காடையர்களும் வாயிலில் நுழைந்தார்கள். எனக்கு உள்மனது நடுங்க ஆரம்பித்துவிட்டது. இருந்தாலும் சமாளித்துக்கொண்டு, 'என்ன சில்வா, இப்பப் பக்கம்?' என்று சிரிக்க முயன்றேன்.

''சும்மாதான், நீங்கள் இருக்கிறீகளா இல்லாவிட்டால் யாழ்ப்பாணத்துக் கம்பி நீட்டி விட்டீர்களா என்று பார்க்கத்தான் வந்தேன்'' என்றான்.

''முருகனை விட்டு நான் எங்கே தான் போக முடியும்?'' என்று சொன்ன என் குரலே தெளிவாக இல்லை.

'எங்களுக்குக் கொஞ்சம் தண்ணீர் குடிக்க வேண்டும்.' என்றான் சில்வா. நான் சரியென்று குசினிப் பக்கம் போனேன். எனக்குப் பின்னால் அவர்கள் தொடர்ந்து வருவதை உணர்ந்தேன். ஆனாலும் திரும்பிப் பார்க்கவில்லை. ஒரு செம்பில் தண்ணீரை வார்த்துக் கொண்டு நிமிர்ந்தேன். எனக்கு முன்னால் அந்த மூன்று காடையர்களும் நின்றார்கள். செம்பைப் பிடித்த எனது கையில் நிதானமில்லை.'

''அது சரி ஐயா, எங்கே அம்மாவைக் காணவில்லை.''

நான் திரும்பித் திரும்பி மனதிற்குள் ஒத்திகை பார்த்து வைத்திருந்த வசனங்களை ஒப்புவித்தேன். 'அவநேற்றே ஊருக்குப் போய் விட்டாவே.' 'பளீர்' என்று என் கன்னத்தில் ஒரு அறை விழுந்தது. செம்பும் தண்ணீரும் உருண்டு சிதறிற்று. என் கண்களுக்குப் பார்வை வரு முன்பே என் மடியில் கையைப் போட்டு ஒருவன் இழுத்தான். மற்றக் கையினால் வயிற்றில் ஒரு குத்து விட்டான்.

தமிழ்பண்டி, பொய்யா சொல்லுகிறாய்? இன்று காலையில் கூட உன் பொண்டாட்டியைப் பார்த்தேனே!'

மற்றவன் கேட்டான்: 'சொல்லடா! அவளை யார் வீட்டில் கொண்டுபோய் ஒளித்து வைத்திருக்கிறாய்?' –எனக்கு நெஞ்சில் கொஞ்சம் தண்ணீர் வந்தது. இந்த முரடர்கள் நான் அவளை வேறு யார் வீட்டிலோ ஒளித்து வைத்திருப்பதாக நினைத்து விட்டார்கள். ஆகையால் இந்த வீட்டில் அதிகம் பார்க்க மாட்டார்கள். என் உயிர் போனாலும் சரி, அவள் மானம் நிலைக்கட்டும் என்று நினைத்துக் கொண்டேன்.

''என்னடா பேசாமல் நிற்கிறாய்?''

குத்து! அடி! உதை!
குத்து! அடி! உதை!
குத்து! அடி! உதை!

நான் இயக்கமின்றிக் கிழே விழுந்து விட்டேன். அம்மட்டிலும் அவர்கள் விடவில்லை. இரண்டு பேர் என்னைப் பிடித்து தூக்கினார்கள்.

''அவள் இருக்கிற இடத்தை நீ சொல்லமாட்டாய்? கடைத் தெருப்பக்கம் காலியிலிருந்து லொறியில் வந்திருக்கிறான்கள். அவன்களிடம் உன்னைக் கொண்டு போய்க் கொடுத்தால் உன்னைத் தலை கீழாகக் கட்டித் தூக்கித் தோலை உரித்த பிறகு கீழே நெருப்பைக் கொழுத்திச் சுடுவான்கள். உனக்கு அது தான் சரி! வாடா!'' என்று சொல்லி இழுத்தார்கள். என்னால் நடக்கவும் முடியவில்லை. அவ்வளவு அடி அகோரம். அவர்கள் என்னை இழுத்துக்கொண்டு நடு வீட்டுக்கு வந்து விட்டார்கள். மேலே என் மனைவி.... அந்த அறையையும் கடந்து வெளியே காலை வைத்து விட்டார்கள்.

''நில்லுங்கள்! நில்லுங்கள்!'' என்ற கூச்சலோடு என் மனைவி பரணிலிருந்து குதித்தாள்.

''அவரை விட்டு விடுங்கள்!''  என்று அலறிக் கொண்டே என்னிடம் ஓடி வந்தாள்.

அவர்கள் என்னை விட்டு விட்டார்கள். ஆறு முரட்டுக் கரங்கள் அவளை மறித்துப் பிடித்தன.

பிறகு....

என்னை ஒரு மேசையின் காலோடு பின் கட்டாகக் கட்டினார்கள். அவளை – என் மனைவியை குசினிப் பக்கம் இழுத்துக் கொண்டு போனார்கள். இரண்டொரு நிமிஷங்களில் அவளுடைய அலறல் கேட்டது. பிறகு அவள் அலறவில்லையோ, அல்லது நான் தான் இரத்தம் கொதித்து மூளை கலங்கி, வெறி பிடித்து, மயங்கி விட்டேனோ?

மறுபடி எனக்கு நினைவு வரும் பொழுது அதே மேசையடியில் அவ்விதம் ஒருவருடைய மடியில் படுத்திருப்பதை உணர்ந்தேன். என்னை அவ்விதம் ஆதரவாகத் தூக்கி மடிமீது வைத்திருப்பது யாரென்று அறிய ஒரு ஆவல். கண்களைத் திறந்து பார்த்தேன்.

என் மனைவி.

மானம் அழிந்த என் மனைவி...

எத்தனையோ நூற்றாண்டுகளாக ஊறிப்போன 'கருந்து' என்னைச் சித்திரவதை செய்தது. மானத்தை இழந்த என் மனைவியின் மடிமீது தலை வைத்துப்படுத்திருக்கிறேன்.... என் உடம்பு கூனிக் குறுகியது. எழுந்து வெளியே நிலத்தில் விழுந்து விடவேண்டுமென்று மனம் உன்னிற்று.

என் முகத்திலே ஒரு சொட்டுக் கண்ணீர். இன்னொன்று இன்னொன்று என் முகம் அவள் கண்ணீரால் நனைய, மனமும் சிந்திக்கத் தொடங்கியது.

மூன்று விஷப்பாம்புகள் அவளைக் கடித்து இன்பத்தை உறுஞ்சின. அவள் உடலும் உள்ளமும் வேதனையால் துடித்தன. எரிந்து போகிற உடலை யாரோ என்னவோ செய்தார்கள். மனம் சிறிதும் சம்பந்தப்படாத போது வெறும் உடலுக்கு நேர்ந்த தீங்கினால் மானம் அழிந்து விடுமென்றால் பிரசவத்திற்காக டாக்டரிடம் போகும் பெண்களெல்லாம்....

என் மனதில் எழுந்த அருவருப்பை வெளியே இழுத்தெடுத்துத் தூர வீசினேன். பரிதாபப்படவேண்டிய, பாராட்டப்பட வேண்டிய என் மனைவியின் பெருமை என் நெஞ்செல்லாம் நிறைந்தது. மெதுவாக அவள் கைகளைப் பற்றி என் மார்போடு அணைத்துக் கொண்டேன்.

பிறகு பொலிஸ் வந்தது. பேபி நோனா தான் அந்த உதவியைச் செய்தாளென்று பின்னால் தெரிந்து கொண்டேன். என்னவோ கஷ;டங்களெல்லாம் பட்டு, அகதி முகாமில் கிடந்துழன்று எப்படியோ இங்கு வந்து சேர்ந்தோம்.

...................................................

''இப்பொழுது சொல்லுங்கள் மாஸ்டர். பலாத்காரத்தினால் ஒரு பெண்ணின் உடல் ஊறு செய்யப்பட்டால் அவள் மானம் அழிந்து விடுமா? அதற்காக அவள் உயிரையும் அழித்து விடவேண்டுமா...? அப்படி உயிரை விட்டவளைப் பத்தினித் தெய்வமென்று கும்பிட வேண்டுமா? கணவன் இறந்தவுடன் உடன் கட்டை ஏறியவள் அப்படிச் செய்வதே கற்புடைய மகளிர் கடமை என்ற சமூகக் கருத்தினால் உந்தப்பட்டு ஏற்றப்பட்டவள் பத்தினித் தெய்வமா, அல்லது பகுத்தறிவற்ற சமுதாயத்திற்குப் பலியான பேதையா?.... சொல்லுங்கள் மாஸ்டர்....!''

கணபதி ஐயர் உணர்ச்சி மேலீட்டினால் பொருமினார்.

''என்னை மன்னித்துக் கொள்ளுங்கள் ஐயா! இப்படித்தான் பரம்பரை பரம்பரையாக இரத்தத்தில் ஊறிப்போன பல விஷயங்களைப் பற்றிச் சிந்திக்காமலே அபிப்பிராயம் கொண்டு விடுகிறோம். நான் கூட எவ்வளவு முட்டாள் தனமாக அபிப்பிராயம் சொல்லிவிட்டேன்... ஐயா, பகுத்தறிவு, பகுத்தறிவு என்று சொல்லிக் கொண்டு தேவையில்லாத விஷயங்களிலெல்லாம் வாய்வீச்சு வீசுகின்ற பலரை எனக்குத் தெரியும். ஆனால் உண்மையான பகுத்தறிவு வாதியை இன்றைக்குக் கண்டு பிடித்து விட்டேன்'' என்று சொன்னார் மூர்த்தி மாஸ்ரர். ஐயர் வீட்டுச் சுவரிலே இருந்த மகாத்மா காந்தியின் படம் - அதிலே ஐயரின் சாடை தெரிவது போலத் தோன்றிற்று மூர்த்தி மாஸ்டருக்கு.

Researchers 'design for failure' with model material


Detail —When deciding what materials to use in building something, determining how those materials respond to stress and strain is often the first task. A material's macroscopic, or bulk, properties in this area—whether it can spring back into shape, for example—is generally the product of what is happening on a microscopic scale. When stress causes a material's constituent molecules to rearrange in a way such that they can't go back to their original positions, it is known as "plastic deformation."

Researchers at the University of Pennsylvania have devised a method to study stress at the macro and micro scales at the same time, using a model system in which microscopic particles stand in for molecules. This method has allowed the researchers to demonstrate an unusual hybrid behavior in their model material: a reversible rearrangement of its particles that nevertheless has the characteristics of plastic deformation on the macroscale. That kind of plastic deformation is more akin to what happens with ketchup or toothpaste, a liquid-like flowing instead of a brittle fracturing of the material's particles.

Their study could pave the way for designing this potentially useful trait into new materials. Plastic deformation dissipates energy rather than transferring it, so a material that could repeatedly deform in this way could be used to dampen vibrations or protect against impacts.

The study was conducted by postdoctoral researcher Nathan Keim and professor Paulo Arratia, both of the Department of Materials Science and Engineering in Penn's School of Engineering and Applied Science. It was published in Physical Review Letters . "If you're driving your car and you hit a lamppost, your car would be totally deformed," Arratia said. "That's plastic deformation because it's irreversible. When you put your car into reverse and back up away from the lamppost, it's not as if the car just springs back into shape. And even if you take it to the body shop and hammer it out to look like new, it's never going to be the same again on the atomic level."

"On the other end of the spectrum," Keim said, "there's elastic deformation. Those deformations are usually reversible rearrangements. If you take a piece of steel and deform it just a little bit, like sitting on the hood of your car rather than running it into a lamppost, it will come back exactly as it started, even on the microstructural level.

"What we were able to show with this model is that you can have something that's between the two ends of this spectrum, a hybrid regime that is plastic but also reversible."

Simultaneously investigating both the macroscopic and microscopic behavior of a material under stress time is a challenge: bulk materials are generally opaque, so seeing what is happening inside of them while they maintain their bulk properties is impossible. To provide a window to this inner world, the researchers built a model material that sacrifices complexity for access. "The complexity we sacrificed is the third dimension," Keim said. "We have made an effectively 2-D material in the lab that consists of microscopic particles that sit on an oil-water interface. These particles have a little electric charge that keeps them constantly pushing away from each other, which means you can think of them as drops of liquid in an emulsion or even as atoms."

The researchers used this model material to study a behavior known as the "yielding transition," which is how disordered solids begin to flow. Just as toothpaste doesn't immediately flow out of the tube and ketchup doesn't pour out of the bottle once the cap is removed, the particles of a disordered solid are jammed against one another and don't easily rearrange themselves unless outside energy is added. In the case of ketchup, this outside energy often takes the form of tapping the side of the bottle.

In the case of this model material, the researchers added this energy by way of a needle that also sat at the material's oil-water interface, in the plane with the rest of the particles. Using an electromagnetic field, they could swing the needle back and forth against the particles and measure how much resistance they provided.

In experimenting with this model material, the researchers were surprised by what they described as a "learned behavior." They found that by repeatedly moving the needle back and forth, irreversibly deforming the material many times, the particles eventually rearranged themselves in such a way that they went back to their original state after each cycle of deformation. "The material can reorganize itself so that the link between plasticity and irreversibility is broken," Arratia said. "The material flows slightly, and yet, at the end of each cycle, it is exactly unchanged."

Critically, this reversible rearrangement of particles is not like what happens in elastic deformations. "After the material is deformed," Keim said, "it doesn't just bounce back to its original state. Rather than just pushing back elastically, like a spring would, it gives a little bit and dissipates energy, more like a viscous fluid than a solid." Having a mix of plastic and elastic properties is potentially useful.

"You might want this in materials where the alternative to flowing is shattering," Keim said. "You'd rather that it deform a little bit before breaking, and you'd also want things not to be severely altered or damaged by being deformed again and again. This kind of plastic deformation also dissipates a lot more energy; you want the body of your car to absorb the energy of an impact and dissipate it, not transfer it to you."

While this behavior has now only been observed in the researchers' model material, understanding the conditions in which it arises could lead to ways of producing it in materials that might be used outside the lab.

"We are designing for failure," Arratia said. "Elastic deformation is pretty great, but it can't last forever, eventually something has to give. And when it gives, this would be a pretty great way to do it. You'd like that transition to be as graceful and non-destructive as possible."

IN PHOTO: A map of a portion of the material. Dots represent particle positions, and circles represent rearrangements.

Source: Phys Org
Posted by: Er_sanch.

Photo: LATEST MECHANICAL ENGINEERING RESEARCH UPDATE IN STRENGTH OF MATERIALS (Feb. 13, 2014)

Researchers 'design for failure' with model material 

Detail —When deciding what materials to use in building something, determining how those materials respond to stress and strain is often the first task. A material's macroscopic, or bulk, properties in this area—whether it can spring back into shape, for example—is generally the product of what is happening on a microscopic scale. When stress causes a material's constituent molecules to rearrange in a way such that they can't go back to their original positions, it is known as "plastic deformation."

Researchers at the University of Pennsylvania have devised a method to study stress at the macro and micro scales at the same time, using a model system in which microscopic particles stand in for molecules. This method has allowed the researchers to demonstrate an unusual hybrid behavior in their model material: a reversible rearrangement of its particles that nevertheless has the characteristics of plastic deformation on the macroscale. That kind of plastic deformation is more akin to what happens with ketchup or toothpaste, a liquid-like flowing instead of a brittle fracturing of the material's particles.

Their study could pave the way for designing this potentially useful trait into new materials. Plastic deformation dissipates energy rather than transferring it, so a material that could repeatedly deform in this way could be used to dampen vibrations or protect against impacts.

The study was conducted by postdoctoral researcher Nathan Keim and professor Paulo Arratia, both of the Department of Materials Science and Engineering in Penn's School of Engineering and Applied Science. It was published in Physical Review Letters . "If you're driving your car and you hit a lamppost, your car would be totally deformed," Arratia said. "That's plastic deformation because it's irreversible. When you put your car into reverse and back up away from the lamppost, it's not as if the car just springs back into shape. And even if you take it to the body shop and hammer it out to look like new, it's never going to be the same again on the atomic level."

"On the other end of the spectrum," Keim said, "there's elastic deformation. Those deformations are usually reversible rearrangements. If you take a piece of steel and deform it just a little bit, like sitting on the hood of your car rather than running it into a lamppost, it will come back exactly as it started, even on the microstructural level.

"What we were able to show with this model is that you can have something that's between the two ends of this spectrum, a hybrid regime that is plastic but also reversible."

Simultaneously investigating both the macroscopic and microscopic behavior of a material under stress time is a challenge: bulk materials are generally opaque, so seeing what is happening inside of them while they maintain their bulk properties is impossible. To provide a window to this inner world, the researchers built a model material that sacrifices complexity for access. "The complexity we sacrificed is the third dimension," Keim said. "We have made an effectively 2-D material in the lab that consists of microscopic particles that sit on an oil-water interface. These particles have a little electric charge that keeps them constantly pushing away from each other, which means you can think of them as drops of liquid in an emulsion or even as atoms."

The researchers used this model material to study a behavior known as the "yielding transition," which is how disordered solids begin to flow. Just as toothpaste doesn't immediately flow out of the tube and ketchup doesn't pour out of the bottle once the cap is removed, the particles of a disordered solid are jammed against one another and don't easily rearrange themselves unless outside energy is added. In the case of ketchup, this outside energy often takes the form of tapping the side of the bottle.

In the case of this model material, the researchers added this energy by way of a needle that also sat at the material's oil-water interface, in the plane with the rest of the particles. Using an electromagnetic field, they could swing the needle back and forth against the particles and measure how much resistance they provided.

In experimenting with this model material, the researchers were surprised by what they described as a "learned behavior." They found that by repeatedly moving the needle back and forth, irreversibly deforming the material many times, the particles eventually rearranged themselves in such a way that they went back to their original state after each cycle of deformation. "The material can reorganize itself so that the link between plasticity and irreversibility is broken," Arratia said. "The material flows slightly, and yet, at the end of each cycle, it is exactly unchanged."

Critically, this reversible rearrangement of particles is not like what happens in elastic deformations. "After the material is deformed," Keim said, "it doesn't just bounce back to its original state. Rather than just pushing back elastically, like a spring would, it gives a little bit and dissipates energy, more like a viscous fluid than a solid." Having a mix of plastic and elastic properties is potentially useful.

"You might want this in materials where the alternative to flowing is shattering," Keim said. "You'd rather that it deform a little bit before breaking, and you'd also want things not to be severely altered or damaged by being deformed again and again. This kind of plastic deformation also dissipates a lot more energy; you want the body of your car to absorb the energy of an impact and dissipate it, not transfer it to you."

While this behavior has now only been observed in the researchers' model material, understanding the conditions in which it arises could lead to ways of producing it in materials that might be used outside the lab.

"We are designing for failure," Arratia said. "Elastic deformation is pretty great, but it can't last forever, eventually something has to give. And when it gives, this would be a pretty great way to do it. You'd like that transition to be as graceful and non-destructive as possible."

IN PHOTO: A map of a portion of the material. Dots represent particle positions, and circles represent rearrangements.

Source: Phys Org
Posted by: Er_sanch.

US researchers make a 3D printer to build houses !


The huge 3D printer, built by researchers in the US, is still being tested, but could make houses cheaper to build and easier to repair. The printer operates on two rails and glides back and forth spraying concrete from its nozzle - just like a traditional printer would lay down ink. Human workers will then complete the rest of the building, such as hanging doors and installing windows.

Source: Science Alert

(Future of StoryTelling: Paul Zak) The Neurochemistry of Empathy, Storytelling, and the Dramatic Arc

)
 The Neurochemistry of Empathy, Storytelling, and the Dramatic Arc

very good video explaining the Science beneath the Dramatic Arc way of Story-Telling and how it is linked to some neuro-chemical events I Really enjoyed the examples and real life events displayed within the video

Graphene+Platinum Nanoparticles Bonding Effects Revealed — Fuel Cell Production May Fall

New research from the University of Arkansas has revealed that platinum nanoparticles automatically limit their own size and organize into specific patterns when they’re bonded to freestanding graphene. When exhibiting these behaviors, the platinum nanoparticles retain the ability to function effectively as a catalyst for chemical reactions — a finding that the researchers think may lead to lowered production costs for platinum-catalyzed fuel cells.

“Because platinum is a rare metal, a lot of the expense that goes into manufacturing hybrid vehicles is coming from the platinum needed to catalyze fuel cells,” explained Paul Thibado, a professor of physics at the University of Arkansas. “Platinum, when placed on solid surfaces, diffuses to form random particles that grow uncontrollably, and that limits their reactivity,” he continued. “On the other hand, freestanding graphene has a very flexible surface, and we found that, due to local strain effects, there is an 80% reduction in the amount of platinum needed to maintain effective catalysis. "Something else that the new research shows is that “a functionally superior, single-crystal platinum nanoparticle emerges from its application to graphene.” “What we found was pretty exciting,” Thibado explained. “It’s really quite special.”

• The University of Arkansas, Fayetteville provides more:

The recent study, consisted of high resolution transmission electron microscopy combined with scanning tunneling microscopy and state-of-the-art computational molecular dynamics. That is a combination rarely seen in physics.

Scanning tunneling microscopy, which produces images of individual atoms on a surface, was used to view the behavior of the platinum nanoparticles on the graphene. Researchers in Missouri used transmission electron microscopy, a technique in which a beam of electrons is transmitted through an ultra-thin material, to confirm the crystalline properties. The merger of both experimental techniques with theoretical modeling yielded an unexpected result for the researchers: the bonding of the graphene to the platinum nanoparticles was unusual.

“Because it is so strong and flexible, graphene typically wraps itself around the material that it is bonding with,” Thibado stated. “In this case, the bonding with the platinum was completely different, more like a pyramid.”

The new findings were detailed in a paper published in the journal ACS Nano .

Source: Clean Technica
Posted by: James Hamilton.

Common Bulb Types

Recycling at its best.

Waste plastic bottles couldn't be used in any better way.

Africa's first plastic bottle house rises in Nigeria!

Monday, March 10, 2014

The city of Lord shiva Varanasi..

Varanasi or Kashi is the holiest of the seven sacred cities in Hinduism and Jainism. Hindus believe that death at Varanasi brings salvation. It is one of the oldest continuously inhabited cities in the world and the oldest in India.
 Unfortunately many of its temples were plundered and destroyed by Mohammad Ghauri in the 12th century. The temples and religious institutions in the city now are of 18th century vintage. The Kashi Naresh is the chief cultural patron of Varanasi, and an essential part of all religious celebrations. The culture of Varanasi is closely associated with the Ganges. The city has been a cultural center of North India for several thousand years, and has a history that is older than most of the major world religions. The Benares Gharana form of Hindustani classical music developed in Varanasi, and many prominent Indian philosophers, poets, writers, and musicians live or have lived in Varanasi. Gautama Buddha gave his first sermon at Sarnath located near Varanasi.
 Varanasi is the spiritual capital of India. Scholarly books have been written in the city, including the Ramcharitmanas of Tulsidas. Today there is a temple of his namesake in the city, the Tulsi Manas Mandir.One of the largest residential University of Asia Benares Hindu University is located here. People often refer to Varanasi as "the city of temples", "the holy city of India", "the religious capital of India", "the city of lights", "the city of learning", and "the oldest living city on earth."Please let me share with you how I see Varanasi and how life can be in this Indian city.

According to Hindu mythology, Varanasi was founded by Lord Shiva. The city is one of the seven sacred cities of Hindus. It is a city surrounded by death. The biggest tourist attraction here is to see the cremations. Hundreds of Indians arrange tours for foreigners to where the cremations take place. Other locals charge money to allow visitors to actually see the burning scenes from nearby buildings.https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEjYYCnc62ya0zUMc4VhbGyFiH2pccmiSOFMOUxT0MHwM_AnVYNO-8mEqaJgADcXIBIDdjmH9oa2Tj2NC7DIuSbtAlgrgUfe9WCePVCii74Pmy-fsiaMgS-IleU-pUVudnIkXMaNAaG4fuhI/s320/aarti-on-ganges-river-varanasi-india2.jpg

“Pictures are not allowed here, sir, but if you want I can take you to where you can take some. Just for 200 rupees,” I was told.

But I’ve already been here for some time, so I continue on without any thought of the offer. If there’s one thing I’ve noticed about this city in the time I’ve spent in India, is that it’s chaotic.

I am staying in a room here, which reminded me of Van Gogh’s “Bedroom in Arles”: a simple bed, one chair and one table. The room costs around 150 Rupees (US$ 2.40). The neighbors have a baby who cries all day long. Pairs of dogs fight down the street. The man at the reception reads aloud all day long. It seems like he has some problems to concentrate in silence.

There is a fan in my room; it has one speed and barely moves. The heat is killing me. I do not sleep alone: two mice come and go from the window and crawl around below my bed. I share the toilet with a couple of other travelers.

The one from Spain came to Varanasi to learn the tabla – an Indian drum similar to bongos but with varying tones – and in the afternoon, he sometimes plays music for us.

There’s also a girl from Italy who tries to explain to me how energies work in the body and how “chakras” – an energy center in the human body. She explains that there are seven chakras and it is taught in Indian yoga. It doesn’t matter how many times I say I’m not interested in energy or spiritual ways, she persists and is convinced that I must find “the way”.

The street in front of my hotel is under construction. During the nights, men from the Musahar caste – one of the lowest one in India – work all night trying to fix the mess around. I wonder how many more days they will need to construct 50 meters of road.

In all of this, I find sanctity in waking up before sunrise to go photograph this world.

Just on the corner from my hotel there is an old guy selling chai (Indian tea), and a few meters from him there is another man selling tobacco. My routine is to have one tea and speak with the man for a couple of minutes. The conversation is always the same and tends to be short. It ends when the tea ends, and I move on.

Sometimes when passing the tobacco guy, he says that it looks like I have some problems and suggests that I do some yoga and meditation.

“I can take you to the best teacher in town!” he shouted once.

“I do not have any problem. Thanks for the offer, brother” I said.

Walking down into the old town in Varanasi is a paradise for capturing photographs. The environment is mad. There are cows all over the place. One day I was on my way to have a lassi (a typical Indian yogurt-based drink), but just before I turned around the corner some people ran passed me heading the opposite direction . Apparently a cow had gotten angry and wasn’t allowing anyone to pass through the street. I asked the owner of the lassi shop, who told me someone pushed down the cow’s head too hard, which made it angry.

In the midst of all of this, it’s really the dogs and monkey who own Varanasi. Every street has a gang of dogs and every roof has a gang of monkeys. Whoever decides to cross the invisible borders between has my pity: it is a war to the death. A stick is therefore a fundamental weapon in every shop in town. Dogs and monkeys know this and will try to keep far away from the most dangerous animal: the human being. You’ll even see people hitting dogs or monkeys on a daily basis.

Some afternoons I like to go up to the roof and see how groups of monkeys start moving from roof to roof. A fight is inevitable. While monkeys run and jump here and there, human beings take stones and sticks to prevent monkeys from jumping into their houses.

The atmosphere is strange, yet it’s hard to get tired of it. Despite the craziness of this city, it is easy to find places to chill out and relax. My favorite place for example, is the roof at my guesthouse, where the sunrises and sunsets are spectacular.


Peugeot to launch hybrid car that runs on air next year




Detail : Hold your breath! French car maker Peugeot is all set to sell the first air-powered hybrid car from next year. With new ‘Hybrid Air’ engine system – the first to combine petrol with compressed air – the firm says the car could reduce petrol bills by 80 percent when driven in cities. “Air power would be used solely for city driving, automatically activated below 43mph,” said Peugeot in a press release.

The system combines a gasoline engine with an air engine which is used at speeds under 70mph. This enables it to run on petrol or air, or a combination of both. According to the company, by 2020, the car could achieve an average of 117 miles a gallon.

The new engine system is a breakthrough for hybrid cars because expensive batteries would no longer be needed. Cars fitted with Hybrid Air system would be cheaper to buy than current hybrid models. Drivers never run the risk of running out of compressed air because the car would have a sophisticated device that ensures it replenishes itself automatically, added Peugeot.

Peugeot has revealed plans to begin selling the first air powered car next year.
Based on a Peugeot 208, it will combine a normal engine with a radical new system that runs on compressed air.
The firm says the car could reduce petrol bills by 80% when driven in cities.


Saving the planet: The Hybrid Air technology could allow a car the size of a Citroën C3 or Peugeot 208 to emit as little as 69g/km of CO2

The system combines a gasoline engine with an air engine which is used at speeds under 70mph

HOW IT WORKS

The system works by using a normal internal combustion engine, special hydraulics and an adapted gearbox along with compressed air cylinders that store and release energy.
This enables it to run on petrol or air, or a combination of the two.
Air power would be used solely for city use, automatically activated below 43mph and available for ‘60 to 80 per cent of the time in city driving’.
The system works by using a normal internal combustion engine, special hydraulics and an adapted gearbox along with compressed air cylinders that store and release energy. This enables it to run on petrol or air, or a combination of the two.
Air power would be used solely for city use, automatically activated below 43mph and available for ‘60 to 80 per cent of the time in city driving’. By 2020, the cars could be achieving an average of 117 miles a gallon, the company predicts.
The air compression system can re-use all the energy normally lost when slowing down and braking. The motor and a pump are in the engine bay, fed by a compressed air tank underneath the car, running parallel to the exhaust.

The revolutionary new ‘Hybrid Air’ engine system – the first to combine petrol with compressed air – is a breakthrough for hybrid cars because expensive batteries will no longer be needed.

Lift-off: The air power will be automatically activated below 43mph and can be used for up to 80 per cent of driving time in urban areas

AIR CAR SPECS

Spacious interior: Allows for full-sized passenger compartment without surrendering boot volume.

Driving comfort and road handling: Hybrid Air promises to deliver nimble response with the boost effect as well as first-class road handling thanks to its automatic transmission.

Worldwide potential: The technology is viable in all markets, making it possible for energy efficient cards in all types of climate and regardless of the state of the roads.

Boot: No space for a spare tyre once the Hybrid Air motor is installed.
Cars fitted with Hybrid Air will be about £1,000 cheaper to buy than current hybrid models.
For more than two years, 100 elite scientists and engineers have been working on the air-powered car in top-secret conditions at Peugeot’s research and development centre at Velizy, just south of Paris.
Hybrid Air is the centrepiece of Peugeot chief executive Philippe Varin’s efforts to restore the fortunes of the historic car maker.
The revolutionary system will be able to be installed on any normal family car without altering its external shape or size or reducing the boot size, provided the spare wheel is not stored there. From the outside, an air-powered car will look identical to a conventional vehicle.
A spokesman said: ‘We are not talking about weird and wacky machines. These are going to be in everyday cars.’
Peugeot, which unveiled its prototype yesterday, envisages introducing it in smaller models such as the 208 at first.

Running on air: The Peugeot 208 is one model that may use the air engine technology in future
The company said that as well as being greener and cheaper to run, the air system created no extra dangers in a collision.
Motorists never run the risk of running out of compressed air late at night on a deserted country road because the car will be fitted with a sophisticated artificial brain that ensures it replenishes itself automatically.
The air compresses and decompresses of its own accord as the car speeds up and slows down.
The Peugeot company was founded in 1810 and the family still has a controlling stake. Thierry Peugeot drafted in Varin - widely hailed in the UK for rescuing Corus, the former British Steel, from the brink of ruin - in 2009.

Varin’s attempts to revive the marque have been hit by the euro meltdown and militant French unions.

a compressed air cylinder next to the exhaust of the new car


Worldwide sales for 2012 were down 8.8per cent to 2.82m.
The company has been hindered in efforts to improve its performance by France’s rigid labour laws. It has also been plagued by violent industrial action at its Aulnay plant near Paris which is due to close next year with the loss of thousands of jobs.
It is embroiled in controversy with rival European car makers over a French state guarantee given to its financing arm last year.

 VIDEO  Explore the technology behind the new Hybrid Air 


The car that runs on air!




Source: First Post
Posted by: Er_sanch.

தமிழனின் தலை சிறந்த சிற்பம் (40x90 cm measured wood carving contained Lord Shiva-Paarvathi sorrounding by nine saints .)



நாம் இன்று பெருமையுடன் தமிழையும் தமிழ் வரலாற்றையும் கலாச்சாரத்தையும் அழித்து வரும் வேளையில், 1000 ஆண்டுக்கு முன்னர் தமிழன் செதுக்கிய சிற்பம் தான் இது. ஒரு விரல் உயரம் இல்லை, ஒரு கை நீளமும் இல்லை.... எப்படி செதுக்கி இருப்பார்களோ??? உலகில் மற்ற நாடுகள் கட்டிடகலைகளில் இப்பொழுது வேண்டுமானால் சாத்தியம் ஆகலாம்... தமிழன் அன்றே சாதித்து விட்டான்.....அர்த்தநாரீஸ்வரர் கோவில் -திருச்செங்கோடு....

40x90 cm measured wood carving contained Lord Shiva-Paarvathi sorrounding by nine saints .

-Thiruchengode (Tamil Temples posted by Kishan)