Search This Blog

Thursday, January 3, 2019

What are the documents required for reinforcement inspection at site?


For Rebars inspection following documents approval must be ensured.

  • Latest revision of approved shop Drawing is available at site and all the site staff is working accordingly.
  • Make sure that Method Statement (MST) is approved.
  • Make sure that all material has approval.
  • Make sure all MEP services are installed and  approved from MEP Engineer of supervision consultants.

For Rebars inspection following items to be checked.

  • Waterproofing must be approved and screed protection of 50 mm must be done prior to start steel reinforcement ( in case of foundation)
  • Make sure the steel is free from rust & dust.
  • Steel top bars bottom bars (main bars & distribution bars) or (vertical bars & horizontal bars) Dia of bar number of bars & overlap length to be checked.
  • Extra bars & diagonal bars to be checked if any.
  • Size of beam to be confirmed as per the latest revision of approved drawings.
  • 6 mm black mild steel tie wire to be used.
  • Ring spacing must be ensured.
  • Concrete cover must be ensured. (30-75 mm)
  • In raft slab and roof slab depth of slab to be ensured as per approved shop drawings.
  • Setting out and levels to be ensured.
http://theconstructionpoint.com

No comments:

Post a Comment