Read more at http://www.tasteofcinema.com/
Search This Blog
Friday, October 17, 2014
Ten Essential Marilyn Monroe Films
Read more at http://www.tasteofcinema.com/
Top Fifty Must-See American Films of the Seventie
Chronologically ordered by year:
Five Easy Pieces (1970)
Patton (1970)
The Last Picture Show (1971)
The French Connection (1971)
A Clockwork Orange (1971) (UK co-production)
Dirty Harry (1971)
Duel (1971)
Harold and Maude (1971)
Straw Dogs (1971)
Cabaret (1972)
Deliverance (1972)
The Getaway (1972)
The Godfather I & II (1972 & 1974)
Papillon (1973)
American Graffiti (1973)
Badlands (1973)
The Long Goodbye (1973)
The Last Detail (1973)
Mean Streets (1973)
Serpico (1973)
The Exorcist (1973)
The Sting (1973)
Chinatown (1974)
The Conversation (1974)
A Woman Under The Influence (1974)
Young Frankenstein (1974)
Blazing Saddles (1974)
One Flew Over the Cuckoo's Nest (1975)
Dog Day Afternoon (1975)
Jaws (1975)
Barry Lyndon (1975) (UK co-production)
Nashville (1975)
All the President's Men (1976)
Carrie (1976)
Marathon Man (1976)
Network (1976)
Rocky (1976)
Taxi Driver (1976)
Annie Hall (1977)
Close Encounters of the Third Kind (1977)
Sorcerer (1977)
Star Wars (1977)
Days of Heaven (1978)
The Deer Hunter (1978)
Halloween (1978)
Apocalypse Now (1979)
Being There (1979)
Kramer vs Kramer (1979)
Manhattan (1979)
Alien (1979)
Five Easy Pieces (1970)
Patton (1970)
The Last Picture Show (1971)
The French Connection (1971)
A Clockwork Orange (1971) (UK co-production)
Dirty Harry (1971)
Duel (1971)
Harold and Maude (1971)
Straw Dogs (1971)
Cabaret (1972)
Deliverance (1972)
The Getaway (1972)
The Godfather I & II (1972 & 1974)
Papillon (1973)
American Graffiti (1973)
Badlands (1973)
The Long Goodbye (1973)
The Last Detail (1973)
Mean Streets (1973)
Serpico (1973)
The Exorcist (1973)
The Sting (1973)
Chinatown (1974)
The Conversation (1974)
A Woman Under The Influence (1974)
Young Frankenstein (1974)
Blazing Saddles (1974)
One Flew Over the Cuckoo's Nest (1975)
Dog Day Afternoon (1975)
Jaws (1975)
Nashville (1975)
All the President's Men (1976)
Carrie (1976)
Marathon Man (1976)
Network (1976)
Rocky (1976)
Taxi Driver (1976)
Annie Hall (1977)
Close Encounters of the Third Kind (1977)
Sorcerer (1977)
Star Wars (1977)
Days of Heaven (1978)
The Deer Hunter (1978)
Halloween (1978)
Apocalypse Now (1979)
Being There (1979)
Kramer vs Kramer (1979)
Manhattan (1979)
Alien (1979)
சில வாஸ்து தகவல்கள் .....
சிவன் கோவில் ,பிள்ளையார் கோவில் முன் புறம் வீடு கட்ட கூடாது ..
தீய சக்திகள் உள்ளே வராது---(நிலையின் கீழ் பாகத்தில் மஞ்சள் கும்குமம் வைத்து தீபம்,தூபம் செய்வது )
இன்று எல்லா இடத்திலும் முடியவில்லை ..
கூர் மையான இலைகளை உடைய செடிகளை வளர்பதால் இந்த பலனை அடைய முடியும் (கூர்மை யான இலைகள் சூர்ய கதிர்களை இழுக்கும் சக்தி படைத்தவை)
சமமாக வரவழைக்க வட்ட இலைகளை உடைய செடிகளை வளர்பதால் இந்த பலனை அடைய முடியும்
பண புழக்கம் அதிகரிக்கும்
இது குழந்தைகளின் ஆரோக்கியத்தை கெடுக்கும் ..
ஆரோக்கியம் தருகிறார்கள்
படுக்கை அறைகளை சுத்தமாக வைத்த ஆண்கள் பெண்களை ஆரோக்யமாக வைத்து உள்ளார்கள் ..
குடி இருந்தால் நல்ல வளர்ச்சி உண்டாகும்
2.வியாபாரம் ,தொழில் ,செய்பவர்கள் தெற்கு பார்த்த வாசல் உள்ள வீட்டில்
குடி இருந்தால் நல்ல வளர்ச்சி உண்டாகும் ..
3.ஆசிரியர்கள் ,மருத்துவர்கள் ,சட்டம் பேசுபவர்கள் ,அறிவியல் துறை சேர்ந்தவர் மேற்கு பார்த்த வாசல் உள்ள வீட்டில்
குடி இருந்தால் நல்ல வளர்ச்சி உண்டாகும் ..
4.மற்றவர்களுக்கு கிழக்கு பார்த்த வீடு சிறந்தது
Additive manufacturing technology can print using plastic, paste or concrete:
It all started with the needs of an architecture student and the interest of an engineer who, seeing the high cost of manufacturing molds, decided to develop a 3D modular printer which uses polymers (plastic) to generate models for low-cost functional prostheses.
To develop this project, stakeholders from different disciplines and educational institutions created their own company, Maker Mex, which was incubated at the Tecnológico de Monterrey (ITESM), in the Technological Park of León, Guanajuato in the center of México.
This modular equipment has implemented several options for printing, with interchangeable modules. If the project requires printing with multiple materials, only a module is changed; the technology eliminates the need for multiple printers.
SOURCE: Phys Org
Posted by: Er_Sanch
உடலில் குரோமியம் உப்பு குறைந்தால்....!
Thursday, October 16, 2014
உலக நாடுகளில் லஞ்சம் வாங்கினால் என்ன தண்டனை தெரியுமா?
# ஜஸ்லாந்து: இங்கு தண்டனை என்னவோ 2 வருட சிறைச்சாலைதான். அதற்கு முன்பு லஞ
சம் வாங்கிச் சேர்த்த பணம் முழுவதும் பறிமுதல் செய்யப்படும். (ஊழல் குறைவான நாடுகள் வரிசையில் இதற்கு முதலிடம்).
# எகிப்து: இங்கு லஞ்சம் வாங்குவது கிரிமினல் குற்றம். நிரூபிக்கப்பட்டால் ஆயுள் முழுவதும் சிறைதான். அதுவும் உள்ளே கடுமையான வேலைகளைச் செய்யவைத்து பெண்டு நிமிர்த்துவார்கள்.
# அர்ஜெண்டினா: சிறை தண்டனையோடு வேலையும் பறிபோய்விடும். விடுதலையான பிறகும் சாகும் வரை வேறு வேலை தர மாட்டார்கள்.
# செக் குடியரசு: சிறை தண்டனை, வேலை காலி, வீடு மற்றும் பிற சொத்துக்கள் பறிக்கப்படும்.
# நைஜர்: இங்கு தண்டனை கொஞ்சம் வித்தியாசமானது. லஞ்சம் பெற்றது உறுதியானால் அரசியல் மற்றும் குடி உரிமைகள் பறிக்கப்படும்.
# இங்கிலாந்து: சிறை தண்டனையுடன் வாக்களிக்கும் உரிமையும் ரத்து செய்யப்படும்.
# சீனா: கீழ்மட்ட அரசாங்க அலுவலர்களுக்கு சிறை தண்டனை. உயர் பொறுப்பில் இருப்பவர்களுக்கு மரண தண்டனையும் உண்டு. விஷ ஊசி போட்டு நொடிகளில் சாகடித்து விடுவார்கள். முன்பெல்லாம் துப்பாக்கியால் நெற்றியில் சுட்டுச் சாகடிப்பார்கள். துப்பாக்கி குண்டுக்கான செலவு உறவினர்களிடம் வசூலிக்கப்படும்.
எல்லாம் சரி இந்தியாவில்..? அரசு ஊழியராக இருந்து லஞ்சம் வாங்கினால் அதிகபட்சம் ஒரு வருடம் வரை சிறை தண்டனை அல்லது அபராதம் அல்லது இரண்டுமே! உணவு, மது, பொழுதுபோக்கு போன்றவற்றை லஞ்சமாக.... ஸாரி 'கிஃப்ட்டாக' வாங்கினால் அபராதம் மட்டுமே. அரசியல்வாதியாக இருந்து லஞ்சம் வாங்கினால் அப்படியே எம்.எல்.ஏ-வாகி, அமைச்சர் ஆவதுதான் 'தண்டனை'!
Production of(fuel) Diesel From Non-Recyclable Waste Plastics
Waste plastic could become a more valuable commodity after developing a process that turns mixed plastic waste into a hydrocarbon-based product.
This is the assessment of Adrian Haworth, sales
and marketing director of Recycling Technologies. This company has developed
WarwickFBR, a recycling system that converts mixed plastic waste (MPW) into
PlaxOil, a heavy fuel alternative that can be sold or used in localised
on-demand combined heat and power (CHP) plants.
Haworth explained that its WarwickFBR system
produces the PlaxOil following pyrolysis of MPW. To do this, the system first
shreds and dries the MPW. It then injects blended product into a fluidised bed
where the long hydrocarbon chains in the polymers are broken down by pyrolysis
- a multi-step process in which organic materials are decomposed by heat in the
absence of oxygen - to form an energy-rich gas. This gas is then filtered to remove
contamination, cooled and condensed to provide PlaxOil.
“Pyrolysis is a fairly simple
process, it starts by drying plastics to be processed. They are then shredded
into smaller pieces and heated in a thermal chamber. The melted plastic is
continually heated until it boils and produces vapours. The vapour is passed
into cooling pipes and distilled into a liquid chemically identical to regular
fuel.”
The art of refining liquid hydrocarbons (crude oil) into diesel, gasoline, and fuel oils was commercially scaled decades ago. Unfortunately, refineries are technologically limited to accepting only a narrow range of liquid hydrocarbons with specific properties and minimal contaminates. Hydrocarbon streams that fall outside of accepted refinery standards have traditionally been landfilled or melted into products of low value. Unrecyclable, hydrocarbon-based waste is a significant environmental problem increasing every year. According to the Environmental Protection Agency’s 2010 Facts and Figures report, over 92% of waste plastic is not recycled. With a growth rate of approximately 8% per year, a critical need for a viable and environmentally sound, general-purpose hydrocarbon-based recycling process exists.
The barriers and challenges are so significant that previous attempts to refine waste plastics into fuel resulted in unviable batch-based machines producing low-value, unstable mixed fuels. However, for three years, JBI, Inc. (“JBI”) has broken through these barriers and has designed and built a viable commercial-scale continuous refinery capable of processing a wide range of hydrocarbon-based waste into ASTM specification fuels.
Research and testing of scale-up through 1-gallon, 3000 gallon, multi-kiln, and 40 ton/day processors in a plant in Niagara Falls, NY. Technical challenges encountered and lessons learned during process development will be explained in detail.
Image via: coastalcare.org
The technology is not overly complicated; plastics are
shredded and then heated in an oxygen-free chamber (known as pyrolysis) to
about 400 degrees celsius. As the plastics boil, gas is separated out and often
reused to fuel the machine itself. The fuel is then distilled and filtered.
Because the entire process takes place inside a vacuum and the plastic is
melted - not burned, minimal to no resultant toxins are released into the air,
as all the gases and or sludge are reused to fuel the machine.
For this technology, the type of plastic you convert to fuel is essential.
If you burn pure hydrocarbons, such as polyethene (PE) and polypropylene (PP),
you will produce a fuel that burns pretty clean. But burn PVC and large amounts
of chlorine will corrode the reactor and pollute the environment. Burning PETE
releases oxygen into the oxygen-deprived chamber, thereby slowing the
processing, and PETE recycles efficiently at recycling centres, so it is best
to recycle PETE traditionally. HDPE (jugs) and LDPE (bags and films) are polyethene,
so usable as fuel as well, just slightly more polluting as a thicker, heavier
fuel is created. But additional processing can turn even HDPE into clean
diesel.
Source (Plastic To Fuel • Insteading)
“Polyethylene and polypropylene are pure hydrocarbons, only they
are arranged in long chains. If you chop those chains into shorter ones, you
get oil, if you chop them even shorter, you get diesel, and if you chop them
again, you get gasoline and eventually burnable gas.”
In Niagara Falls, NY, John Bordynuik’s ‘Plastic Eating Monster’ can even vaporise thick HDPE plastic into a cleaner-burning number 2 fuel. Put plastic in one end of the machine, and out the other end comes diesel, petroleum distillate, light naphtha and gases such as methane, ethane, butane and propane. The machine accepts unwashed, unsorted waste plastics, composites and commingled materials and returns about 1 gallon of fuel from 8.3 pounds of plastic. And the processor uses its off-gases as fuel, therefore using minimal energy to run the machine. John currently has two massive steel processors up and running, with financing secured for three more to be built shortly.
In the Philippines, Poly-Green Technology and Resources Inc. was started by Jayme Navarro whose sister asked him to come up with a way to recycle plastic bags. A plant is being built that will produce 5,000 kilos of fuel per day. www.polygreen.com.ph
Cynar in the UK likes to call their product ‘End of Life Plastic to Diesel’ or ELPD. Their technology converts mixed Waste Plastics into synthetic fuels that are cleaner, low in sulphur and in the case of the diesel, a higher cetane than generic diesel fuel. They have a plant running in Ireland , with another to open in Bristol, UK in January and many more in the planning stage. Each Cynar plant can process up to 20 tons of End of Life Plastic per day, producing 5,000 gallons (19,000 litres) of high quality liquid fuels at a conversion rate of 95%.
Cynar will be supplying Jeremy Rowsell, a British insurance industry executive who lives in Australia, with all the plastic waste fuel he needs to fly a single-engine Cessna from Sydney to London this winter. Fuel will be in place at about 10 locations along the 10,500-mile route. The solo journey dubbed ‘On Wings of Waste’ is intended to heighten awareness of this new fuel.
Of course, it would be best if widespread environmentally friendly plastics were in use, but in the meantime, recycling existing plastics into fuel would keep the plastics out of our waterways. This process is also excellent for difficult to recycle PP and PE plastics like bottle caps, appliance plastics, nursery planters and dirty plastics such as meat wrappings. This process is not suitable for PVC or polystyrene (styrofoam). This technology could also reduce carting issues, as companies that deal with plastic waste could build mini-burners on location.
Japan. Sells International: e-n-ergy.com
UK: Cynar produces a synthetic fuel suitable for all internal combustion
engines: cynarplc.com
Washington, DC: www.envion.com
Boosts easy installation, high efficiency, no second-time pollution.
The plant converts 6,000 tons of plastic into nearly a million barrels yearly.
Circle Pines, MN and International: polymerenergy.com
They have a modular unit that produces 775 litres of fuel for every ton of
plastic waste processing. System capacity is rated at 185 tons per month.
New York/Canada: JBI, Inc. www.plastic2oil.com
20-ton processor, 4,000 lbs. of plastic feedstock per machine per hour.
Philippines: www.polygreen.com.ph
5,000 kilos of fuel per day
Hong Kong: Ecotech Recycling
Social Enterprise
A prototype machine can process three tons of plastic waste into 1,000 litres
of fuel oil per day.
Las Vegas, NV: general@quadraprojects.net
Resources:
UNEP Policy Brief on Plastic Waste: unep.org.pdf
Northeastern University turns plastic waste into energy to drive
generators: phys.org
DIY for under $800.: energeticforum.com
Peswiki Plastic and Energy page: peswiki.com
This homemade device converts around 25 kg of shredded plastic into 24 litres of
diesel in 4 hours. www.emuprim.lv
ரூ.6 லட்சத்தில் இரண்டடுக்கு மாடி வீடு…. ஐ.ஐ.டி., அறிமுகம்…
நாரதா் வரலாறு:_
ஹா்யச்வா்களையும், சபலாச்வா்களையும், பிரஜா விருத்தி செய்யாமல் தடுத்து மோட்ச மாா்க்கத்தை உபதேசித்தாா். அதனால் பிரம்மா இவரைக் கந்தா்வத் தலைவனாகும் படி சபித்தாா். தட்சன் குமாரா்களுக்கு ஞானோபதேசம் செய்து மோட்சமடையச் செய்தாா், அதனால் இவரை ஒரு நிலையில் இல்லாமல் சுற்றுமாறு தட்சன் சபித்தான், அதனால் திாிலோக சஞ்சாாியானாா்.
இவா் கையில் உள்ள வீணைக்கு மஹதி என்று பெயா்.
வீணாகானத்தில் நிகரற்றவா்.
வேதங்கள், வேதாந்தங்கள், இதிகாசங்கள், புராணங்கள், தா்ம ரகஸ்யம், பூா்வகல்ப சரிதம், பிரம்மாண்டத்தின் அமைப்பு, ராஜ நீதி, வித்யைகள், கலைகள், சங்கீதம், நாட்டியம் முதலிய சகல ஞானத்திலும், பேசுந்திறமையிலும் நிகரற்றவா். தேவா்கள், அசுரா்கள் இருவருக்கும் வேண்டியவா். இவ்விரு வகையினரும் இவரை வணங்கினா்.
சகல நற்குணங்களும் உடையவா், நடு நிலை உடையவா், பற்றற்ற புண்யாத்மா, கந்தா்வ கணங்களுள் தும்புருவுடன் சோ்க்கப்படுகிறாா். இவருடைய சகோதாி மகன் பா்வதா்.
முன் கல்பங்களில் வழங்கி வந்த ப்ரும்ம ஞானத்திற்க்கு இவா் ஆதி ரஷி. பகவானுடைய குணங்களை மஹதி என்னும் யாழில் வாசிப்பதும், ஏழு மாா்க்கங்கள் உள்ள ப்ரஹ்ம் வித்தையை உபதேசிப்பதும இவருடைய பணி.
கா்மகதியை பின் தொடா்ந்து ஜீவ கோடிகளுக்கும் உலகங்களுக்கும் நன்மை செய்வதே இவா் நோக்கம். ஜீவாத்மாக்களின் விணை கா்மங்கள் தகுந்த காலங்களில் தகுந்த படி கவனிப்பாா். சாதாரணமாகப் பாா்க்கும் போது இவா் செயல்கள் கலகம் உண்டாக்குவதாகத் தோன்றும், ஆனால் நாரதா் கலகம் நன்மையில் முடியும் என்பது பழமொழி.
அதனால் இவா் கலகப்பிாியா் என்று அழைக்கப்பட்டாா்.
கா்ம தேவதைகளுக்கு இவா் தலைவா். இவாில்லாமல் ஈஸ்வரனின் காாியங்கள் நடப்பது இல்லை.
பெய்யாதிருந்த நாரம்(நாரம்_மழை) இவா் பிறந்தவுடன் பெய்தமையால் நாரதா் என்ற பெயா் பெற்றாா்.
தம்முடன் இருந்த சிறுவா்களுக்கு நாரம் என்னும் ஞானத்தை உபதேசித்ததால் நாரதா் என்றும் பெயா் ஏற்பட்டது.
வால் மீகி தா்ம நாயகனும், பொய் பேசாதவரும்
இன்னும் இப்படிப் பல்வேறு நற்குணங்கள் பொருந்தி உள்ள நாயகன் யாா் என்று நாரதரைக் கேட்ட போது அவா் ராமரைப் பற்றிக்கூற, ராமாயணம் எழுந்தது.
நாரதா் பாண்டவா்களின் உற்ற நண்பரும் கூட! தேவைப் பட்ட போதெல்லாம் அவா்களைச் சந்தித்து அவா்களுக்கு தேவையான வழிகாட்டுதல்களையும், அறிவுறைகளையும் தந்ததை மஹா பாரதத்தில் வியாஸா் வெகுவாக விாித்துரைப்பதைக் காணலாம்.
வேத வியாஸா் மனம் கலங்கி இருந்தபோது அவரை பாகவதத்தை இயற்றுமாறு கூறி அவாின் கலக்கத்தை போக்கி பாகவதம் எழக் காரண புருஷராக இருந்தவரும் இவரே!
அா்சுனன் பாசுபதம் பெறத் தவம் செய்யச் சென்றான் என்ற செய்தியைத் துாியோதனனுக்கு கூறி துாியனின் நண்பன் மூகா சூரனை தவ பங்கத்திற்க்கு அனுப்பி வைத்தாா், இதனால் மூகா சூர வதத்திற்க்குக் காரணமானாா்.
தமயந்தியின் சுயம்வரத்தை இந்திரனுக்குக் கூறி அவளைப் பல சோதனைகளுக்கு ஆட்படுத்தி அவளின் கற்பு நெறியை உலகினுக்கு வெளிப்படுத்தினாா். மேரு மலைக்கு அதன் உயா் வினை உணா்த்தினாா். வன வாசம் செய்த தருமனுக்குத் தீா்த்த மகத்துவம் கூறினாா்.
மேருவின் தன்மையை விந்திய மலைக்கு உணா்த்தினாா், விந்தியம் கா்வம் கொண்டு உயா்ந்து வளர அகத்தியரால் விந்தியத்தின் கா்வபங்கம் செய்ப்பட்டது.
இதனால் அகத்தியா் பெருமை எங்கும் பரவியது.
மந்திரதேச மன்னன் அசுவபதிக்கு சாவித்திரி விரத மகிமை கூறினாா். இம் மன்னனுக்குச் சாவித்ரி என்னும் பெண் பிறந்து பருவமடைந்து பின் சத்யவாணின் குண நலன்களை மன்னனுக்கு கூறினாா். சாவித்ரிக்கு உபதேசம் செய்தாா்.
துருவனுக்கு தத்துவம் உபதேசித்து அவன் நெஞ்சில் நாராயணனை நிலை நிறுத்தினாா்.
பிராசீன பா்க்கியிடம் சென்று உன் வினைக் கா்மங்களினால் உனக்குச் சுகப் பிராப்தி இல்லை என்பதைக் கூறி அவனைத் துறவறம் பூணச் செய்தாா்.
1.கந்தருவன், 2.மனிதன் , 3. பிரும்ம புத்திரா் என்ற மூன்று பிறவியினை இவா் எடுத்தாா். நாரதா் சாபத்தால் பிரம்மன் பூஜையற்றவன் ஆனான்.
பிரகலாதனுக்கு அவன் கருவில் இருக்கும் போது நாராயண மந்திரோபதேசம் செய்தாா்.
மணிக்கிரீவனை மருத மரமாகச் சபித்தாா், கிருஷ்ணாவதார காலத்தில் கண்ணனால் இச்சாபம் தீா்ந்தது.
மும்மூா்த்திகளும் ஒன்றாக எழுந்தருளியிருந்தபோது பொதுவாக நமஸ்காித்து, நமஸ்காரம் உத்தம மூா்த்திக்குாியது என்று கூறிக் கலகம் விளைவித்தாா்.
தட்சன் செய்யும் வேள்வியைப் பற்றி உமாதேவியிடம் கூறினாா், இது பாா்வதி தேவியின் அவதாரத்திற்க்குக் காரணமாயிற்று.
திக்கு விஜயம் செய்யும் இராவணனுக்கு யமபுரம் செல்லும் வழியைக் கூறி, இராவணன் வருவதை யமனுக்கும் அறிவித்தாா்.
அரசா்களை ஜராசந்தன் சிறையிட்டு வைத்துள்ளான் என்பதையும், அனைவரையும் கொல்லவும் போகிறான் என்ற செய்தியையும் கண்ணணுக்குத் தொிவித்தாா்.
ஒரே ஒரு பிரச்சனையை எழுப்பி அதன் மூலம் அவா் பல பொிய விஷயங்களுக்குத் தீா்வு கான்பதை ஏராளமான கதைகள் விளக்குவதை நாம் அறிவோம்.
நாரதரைப் பற்றி சுவையான ஒரு குட்டிககதையைப் பாா்ப்போம், தானே சிறந்த விஷ்னு பக்தா் என்றும் இசைக் கலைஞா் என்றும் கா்வம் கொண்ட நாரதா், ஒரு முறை ஒரு நந்த வனத்தின் பக்கம் செல்கையில் பல பெண்கள் புலம்பி அழுவதைக் கேட்டாா். யாா் அவா்கள் என்று பாா்த்த போது, அவா் திகைத்துப் போனாா்.
தேவதை போன்ற அழகிய முகங்கள் கொண்ட அவா்களில் சிலருக்கு கைகள் இல்லை: சிலருக்கு கால்கள் இல்லை: சிலரோ சிதைந்த உருவத்தோடு இருந்தனா்: சிலா் குள்ளமா ஆகி இருந்தனா்: இதைப் பாா்த்துத் திகைத்த நாரதா் அவா்களை நோக்கி அதன் காரணத்தைக் கேட்டாா், அதற்க்கு அவா்கள்," நாங்கள் ராக தேவதைகள், இன்று வைகுந்தத்தில் நாரதா் என்ற ஒருவா் அபத்தமாக இசையை இசைக்கவே நாங்கள் உருக்குலைந்து, சீா் குலைந்து இப்படி ஆகிவிட்டோம்" என்று பாிதாபமாகத் தங்கள் நிலையைக் கூறினா். நாரதரது கா்வம் ஒழிந்தது. அவா் தான் என்பதை ஒப்புக் கொண்டு, இப்போது நான் ஹனுமனிடம் உண்மையான இசை என்ன என்பதைத் தொிந்து கொள்வதற்க்காக போகிறேன்" என்றாராம். ஹனுமன் அவருக்கு உள்ளத்தின் ஆழத்திலிருந்து வரும் பக்தி இசையைப் பாடிக் கற்றுத் தந்தாராரம்.
நாடக வாயிலாகவும் நமது திரைப்படங்கள் வாயிலாகவும் நாம் பாா்க்கும் நாரதா் வேறு; ஜோதிடம், பக்தி, நாட்டியம், பூஜை முறைகள் இவற்றை உபதேசித்து உரைக்கும் மகத்தான ஞானமுடைய மஹாிஷி நாரதா் வேறு!
நல்ல பக்தராக வேண்டுமா? நல்ல ஜோதிடராக வேண்டுமா? நல்ல நாட்டியக் கலைஞராக வேண்டுமா? நாட வேண்டிய மஹாிஷி நாரதரே!
குடைவரை கோயில் :
தமிழகத்தின் முதல் குடைவரைக் கோவில் :
தமிழகத்தின் முதல் குடைவரைக் கோயில் எது என்பதில் வரலாற்று ஆய்வாளர்களிடம் ஒத்த கருத்துகள் இல்லை. பாண்டியன் செழியன் சேந்தன் கட்டிய பிள்ளையார்பட்டிக் குடைவரையும், மலையடிக்குறிச்சி குடைவரை கோயில்களே முதல் தமிழகக் குடைவரைக் கோயில்கள் என்று சிலரும், மகேந்திர பல்லவன் என்கிற பல்லவ மன்னன் செஞ்சிக்கருகில் உள்ள மண்டகப்பட்டு எனும் ஊரில் உருவாக்கிய குடைவரைக் கோவிலே தமிழகத்தின் முதல் குடைவரைக் கோவில் என்று சிலரும் கூறுகின்றனர். பாண்டியர்கள் தங்கள் முதலாம் பாண்டியப் பேரரசின் போது முப்பதுக்கும் மேற்பட்ட கோயில்களை கட்டி இருந்தனர். அத்துடன் மகேந்திர பல்லவனும் மாமண்டூர், திருக்கழுக்குன்றம், திருச்சிராப்பள்ளி ஆகிய ஊர்களில் குடைவரைக் கோவில்களை அமைத்தவன் ஆவான். தமிழகத்தில் பாண்டியர், பல்லவர், அதியர் மன்னர்களின் மரபினர்களே குடைவரைக் கோவில்களை அமைத்து வழிகாட்டியுள்ளனர்.
மண்டகப்பட்டு இலக்சிதன் கோயில் :
தமிழ் நாடு , விழுப்புரம் மாவட்டத்திலுள்ள மண்டகப்பட்டு என்னும் ஊரில் அமைந்துள்ளது. இலக்சிதன் கோயில் என அழைக்கப்படும் குடைவரை கோயில் ஆகும். கி.பி 590 முதல் கி.பி 630 வரை தமிழகத்தை ஆட்சி புரிந்த பல்லவ மன்னனான முதலாம் மகேந்திரவர்மனால் அமைக்கப்பட்டது இக்கோயில். தமிழ் நாட்டில் கல்லினால் அமைக்கப்பட்ட முதலாவது கோயில் என்றவகையில் தமிழகக் கட்டிடக்கலை வரலாற்றில் இது ஒரு திருப்புமுனையாகக் கருதப்படுகின்றது.
இக்குடைவரையில் காணப்பட்ட மகேந்திரவர்மனின் வடமொழிக் கல்வெட்டில் 'இந்தக்கோயிலை நான்முகன், திருமால், சிவபெருமான் ஆகிய மூன்று தெய்வங்களுக்கும் கல், மண், உலோகம், சுதை, மரம் இன்றி விசித்திர சித்தனாகிய நான் தோற்றுவித்தேன்' என்று குறுப்பிட்டுள்ளார்.
இவரே மாமண்டூர், திருக்கழுக்குன்றம், திருச்சிராப்பள்ளி போன்ற இடங்களில் குடைவரைக் கோயில்களை அமைத்துக் கட்டடக் கலைக்குப் புத்துயிர்
அளித்ததோடு, அழகான சிற்பங்களையும் உருவாக்கியுள்ளார்.
இவருக்குப்பின் வந்த இவர் மகன் நரசிம்மவர்மன் தன் தந்தையின் பணியைத் தொடர்ந்தார். திருக்கழுக்குன்றத்திலுள்ள ஒரு குடைவரைக் கோயில் இவர் காலத்துப் படைப்புக்குச் சிறந்தசான்றாகும். பின்வந்த இராஜசிம்ம பல்லவன் காலத்தில்தான் பல்லவர்காலக் கோயிற்கலை சிகரத்தைத் தொட்டது. காஞ்சிபுரத்துக்கயிலாசநாதர் கோயில், மாமல்லபுரத்துக் குடைவரை படைப்புகளான ஐந்து ரதங்கள், குன்றில் குடையப்பட்ட கோயில்கள், புலிக்குகை
போன்ற படைப்புகள் அனைத்தும் இவரது படைப்பாகும்.
பல்லவர்காலம் குடைவரைகள் :
மண்டகப்பட்டு இலக்சிதன் கோயில்,
பல்லாவரம் குடைவரை,
மாமண்டூர் உருத்திரவாலீஸ்வரம்,
மாமண்டூர் திருமால் குடைவரை,
குரங்கணில்முட்டம் குடைவரை,
வல்லம் வசந்தீஸ்வரம் (செங்கை வல்லம் குடைவரைக் கோயில்கள்),
மகேந்திரவாடி குடைவரை,
தளவானூர் சத்துருமல்லேசுவர் ஆலயம்,
திருச்சிராப்பள்ளி குடைவரை,
நாமக்கல் நரசிம்மர் திருக்கோயில்,
நார்த்தாமலை குடைவரை,
குடுமியான்மலை குடைவரை,
திருமெய்யம் குடைவரை,
சீயமங்கலம் திருத்தூணாண்டார் கோயில்,
விளாப்பாக்கம் குடைவரை,
மாமல்லபுரம் தர்மராஜ மண்டபம்,
மாமல்லபுரம் கோடிக்கல் மண்டபம்,
மாமல்லபுரம் கோனேரி மண்டபம்,
மாமல்லபுரம் வராக மண்டபம்,
மாமல்லபுரம் மகிஷாசுரமர்த்தினி மண்டபம்,
மாமல்லபுரம் மகிஷாசுரமர்த்தினி சிறிய மண்டபம்,
மாமல்லபுரம் மும்மூர்த்தி குடைவரை,
மாமல்லபுரம் பஞ்சபாண்டவர் மண்டபம்,
மாமல்லபுரம் புலிப்புதர் மண்டபம்,
மாமல்லபுரம் பரமேஸ்வரவராக விஷ்ணுகிருகம்,
மாமல்லபுரம் இராமானுஜ மண்டபம்,
மாமல்லபுரம் சிறிய யாளி மண்டபம்,
சாளுவன்குப்பம் அதிரணசண்ட பல்லவேஸ்வரம்,
சாளுவன்குப்பம் புலிக்குடைவரை.
பாண்டியர் குடைவரைகள் :
பிள்ளையார்ப் பட்டிக் குடைவரை,
மலையடிக்குறிச்சிக் குடைவரை,
மகிபாலன்பட்டிக் குடைவரை,
அரளிப்பாறைக் குடைவரை,
திருமெய்யம் குடைவரைகள்,
கழுகுமலைக் குடைவரை,
திருத்தங்கல் குடைவரை,
செவல்பட்டிக் குடைவரை,
திருமலைக் குடைவரை,
திருச்செந்தூர் வள்ளிக்கோயில் குடைவரை,
மனப்பாடுக் குடைவரை,
மூவரை வென்றான் குடைவரை,
சித்தன்னவாசல் குடைவரை,
ஐவர் மலைக் குடைவரை,
அழகர் கோயில் குடைவரை,
ஆனையூர்க் குடைவரை,
வீர சிகாமணிக் குடைவரை,
திருமலைப்புரம் குடைவரை,
அலங்காரப் பேரிக் குடைவரை,
குறட்டியாறைக் குடைவரை,
சிவபுரிக் குடைவரை,
குன்றக்குடிக் குடைவரைகள்,
பிரான்மலைக் குடைவரை,
திருக்கோளக்குடிக் குடைவரை,
அரளிப்பட்டிக் குடைவரை,
அரிட்டாபட்டிக் குடைவரை,
மாங்குளம் குடைவரை,
குன்றத்தூர் குடைவரை,
கந்தன் குடைவரை,
யானைமலை நரசிங்கர் குடைவரை,
தென்பரங்குன்றம் குடைவரை,
வடபரங்குன்றம் குடைவரை.
முத்தரையர் குடைவரைகள் :
மலையடிப்பட்டி வாகீஸ்வரமுடையார் கோயில்.
( படத்தில் உள்ளது மண்டகப்பட்டு குடைவரைக் கோவில்)
Wednesday, October 15, 2014
கருத்தரித்தல்....
Tuesday, October 14, 2014
Chinese scientists unveil new liquid 3D metal printing method
The new method, according to the article on Chinatopix, will revolutionise metal printing by making the process faster, more affordable and energy efficient by controlling the temperature of the medium used to deposit the metal ink.
Researchers Liu Jing and Wang Lei presented the liquid-phase 3D printing technique for the rapid manufacturing of a conductive metal object in one, two or three dimensions, in the study published in the journal SCIENCE CHINA Technological Sciences. The study titled “Liquid phase 3D printing for quickly manufacturing conductive metal objects with a low melting point alloy ink” reveals a four-element alloy, the Bi35In48.6Sn16Zn0.4, which was developed and adopted as the printing ink, along with a streamlined fabrication process.
The Bi35In48.6Sn16Zn0.4 alloy is composed of bismuth, indium, tin and zinc. The scientists said that metal that melts at low temperature has great potential uses for cooling computer chips and in numerous other areas such as thermal interface and micro fluids. “Such material has also been proposed as printing ink with evident value in direct writing electronics and 3D printing technology” the researchers said.
As far as the fabrication process goes, first a 3D object is generated as a computer-aided design (CAD) model and then converted into a STL (stereolithography) file which is then imported into an open source software program that generates slices of the object as a set of horizontal layers and that generates tool paths for each layer. The printing ink is dropped into a liquid phase cooling fluid via an injection needle; the object is printed layer by layer.
Source: Australian Manufacturing.
Posted by: Er_sanch.