amudu: What are the documents required for reinforcement inspection at site?

For Rebars inspection following documents approval must be ensured.

Latest revision of approved shop Drawing is available at site and all the site staff is working accordingly.
Make sure that Method Statement (MST) is approved.
Make sure that all material has approval.
Make sure all MEP services are installed and approved from MEP Engineer of supervision consultants.

Waterproofing must be approved and screed protection of 50 mm must be done prior to start steel reinforcement ( in case of foundation)
Make sure the steel is free from rust & dust.
Steel top bars bottom bars (main bars & distribution bars) or (vertical bars & horizontal bars) Dia of bar number of bars & overlap length to be checked.
Extra bars & diagonal bars to be checked if any.
Size of beam to be confirmed as per the latest revision of approved drawings.
6 mm black mild steel tie wire to be used.
Ring spacing must be ensured.
Concrete cover must be ensured. (30-75 mm)
In raft slab and roof slab depth of slab to be ensured as per approved shop drawings.
Setting out and levels to be ensured.

http://theconstructionpoint.com